Re: Adding Tape drive Ldev 8 HP 3000 system (272 Views)
Reply
Occasional Visitor
Muzmmel Ahmed
Posts: 1
Registered: ‎11-20-2010
Message 1 of 3 (272 Views)

Adding Tape drive Ldev 8 HP 3000 system

I have A500 with Hp3000 OS , with external
Tape array 5300 .Tape array has ldev 7 ( tape drive ) and ldev 11 ( CD ). I want to add ldev8
to the tape array.
Scsi addres of the Ldev 7 path =0/4/0/0.1.0
Scsi addres of the Ldev 11 path =0/4/0/0.2.0
for Ldev 8 path = 0/4/0/0.2.0
I have made all the changes in Sysgen for Ldev8
every thing looks good when I compare Ldev 7 and ldev 8 .
During boot up at BCH used Sea command . I can see Ldev 8 no errors.
ISL checked mapper ldev 8 good no errors.
but when i boot the system ( start norecvery )
sytem error message " ldev 8 not added to configration LLIO device configuration error
= -11 )
Any one has bright idea for this problem .
really appreciate help.

Thanks
mac
Please use plain text.
Occasional Visitor
Julian Heredero
Posts: 2
Registered: ‎10-03-2000
Message 2 of 3 (272 Views)

Re: Adding Tape drive Ldev 8 HP 3000 system

Hello,
You indicated the same hardware path to ldev ldev 11 and 8.
Check this.
Greetings.
Please use plain text.
Trusted Contributor
Jorge Pons
Posts: 406
Registered: ‎06-18-2001
Message 3 of 3 (272 Views)

Re: Adding Tape drive Ldev 8 HP 3000 system

Hi
Like says Julian (hello Julian) the HW Path is the same that CD, in this case you must delete this device. after this, you can execute "doionow" to recreate device files.

Regards, Jorge
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation