Re: kernal parameter tuning (253 Views)
Reply
Super Advisor
rajesh73
Posts: 448
Registered: ‎03-17-2009
Message 1 of 9 (253 Views)
Accepted Solution

kernal parameter tuning

As per application team, requirment i want to change the kernal parameter.
kernal parameter name is shmni 504 to shmni 704.

this kernal modification take any alarm in OS or Normal.
Please advice before that what type of precaution backup to be taken.
note:this very high production server

pls help me urgent
Valued Contributor
Vivek_Pendse
Posts: 139
Registered: ‎05-04-2007
Message 2 of 9 (253 Views)

Re: kernal parameter tuning

Just collect the config data before parameter change.
Super Advisor
rajesh73
Posts: 448
Registered: ‎03-17-2009
Message 3 of 9 (253 Views)

Re: kernal parameter tuning

config data means nickle output .
Honored Contributor
Michael Steele_2
Posts: 4,934
Registered: ‎08-14-2002
Message 4 of 9 (253 Views)

Re: kernal parameter tuning

Need the os version.

11.23 then man kctune, kconfig, mk_kernel

11.11 then man kmtune, mk_kernel
Support Fatherhood - Stop Family Law
Honored Contributor
Michael Steele_2
Posts: 4,934
Registered: ‎08-14-2002
Message 5 of 9 (253 Views)

Re: kernal parameter tuning

Don't forget to assign points to all of the responses
Support Fatherhood - Stop Family Law
Esteemed Contributor
Ismail Azad
Posts: 487
Registered: ‎11-09-2010
Message 6 of 9 (253 Views)

Re: kernal parameter tuning

Hi rajesh,

Rajesh
> his kernal modification take any alarm in OS or Normal.
Please advice before that what type of precaution backup to be taken.


Well what I guess what you are worrying about is a current kernel that might get corrupted as it's obvious there is some reason you don't have confidence in this modification or maybe you are just checking as you have mentioned the keywords high_production_server.

Well on a 11.31 operating system maintains what is called as the 5th section of a manual page which typically consists of momentous information termed as a "constraint". Well now the constraint would tell you if the value is within allowed limits.

As of my knowledge there is no alram directly on an shmni tunable unless it is configured onto an SNMP trap or probably to the root mail.

Well about backups on a 11.31 operating system it should suffice to say that if you are careful enough to update or not update the configuration -- /stand/backup/vmunix -- should save you if hypothetically a problem would arise.

Regards
Ismail Azad
Read, read and read... Then read again until you read "between the lines".....
Super Advisor
rajesh73
Posts: 448
Registered: ‎03-17-2009
Message 7 of 9 (253 Views)

Re: kernal parameter tuning

pls find the os vesion HP-ux 11.11
Valued Contributor
Vivek_Pendse
Posts: 139
Registered: ‎05-04-2007
Message 8 of 9 (253 Views)

Re: kernal parameter tuning

For 11.11, with below procedure, you can rebuild the kernel & can have kernel backup at --> /stand/backup/vmunix..

# cd /stand/backup
# /usr/lbin/sysadm/system_prep â s system
# mk_kernel â s /stand/backup/system

Thanks,
Vivek
Esteemed Contributor
Ismail Azad
Posts: 487
Registered: ‎11-09-2010
Message 9 of 9 (253 Views)

Re: kernal parameter tuning

Hi rajesh,

Vivek
> For 11.11, with below procedure, you can rebuild the kernel & can have kernel backup at --> /stand/backup/vmunix..


Well in the transition terms from let's say a 11.11 to 11.23 operating system, a major difference noted is the test kernel which is used by default by mk_kernel known as /stand/build/vmunix_test and the backup kernel being /stand/vmunix.prev. So, there are innumerous number of documents stating that the backup kernel should never be "renamed". So vivek, in this scenario you would have a /stand/vmunix.prev and a /stand/backup/vmunix?? Jus curious... :)

Regards
Ismail Azad
Read, read and read... Then read again until you read "between the lines".....
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.