insf => usbcomposite then shutdown (742 Views)
Reply
Valued Contributor
srayfay
Posts: 38
Registered: ‎12-02-2011
Message 1 of 5 (742 Views)
Accepted Solution

insf => usbcomposite then shutdown

Hello,

I have rx6600 with HPUX v3, I find something strange last night,

these are the last lines of my syslog, 

looks like the server found new usb bus, insf then reboot !!

no dump, no crash were made

 

any suggestion please?

 

Oct 12 03:07:53 suthvm06 vmunix: 0/0/2/1.2 usbcomposite
Oct 12 03:07:53 suthvm06 vmunix: 0/0/2/1.2.0 hid
Oct 12 03:07:53 suthvm06 vmunix: 0/0/2/1.2.1 hid
Oct 12 03:07:53 suthvm06 sfd[3022]: started 'insf' to create device special files for newly found devices.
Oct 12 03:07:54 suthvm06 sfd[3022]: execution of 'insf' completed.
Oct 12 03:07:57 suthvm06 vmunix: 0/0/2/1.2 usbcomposite
Oct 12 03:07:57 suthvm06 vmunix: 0/0/2/1.2.0 hid
Oct 12 03:07:57 suthvm06 vmunix: 0/0/2/1.2.1 hid
Oct 12 03:07:57 suthvm06 sfd[3022]: started 'insf' to create device special files for newly found devices.
Oct 12 03:07:58 suthvm06 sfd[3022]: execution of 'insf' completed.
Oct 12 03:08:02 suthvm06 vmunix: 0/0/2/1.2 usbcomposite
Oct 12 03:08:02 suthvm06 vmunix: 0/0/2/1.2.0 hid
Oct 12 03:08:03 suthvm06 vmunix: 0/0/2/1.2.1 hid
Oct 12 03:08:03 suthvm06 sfd[3022]: started 'insf' to create device special files for newly found devices.
Oct 12 03:08:03 suthvm06 sfd[3022]: execution of 'insf' completed.
Oct 12 03:08:05 suthvm06 vmunix: 0/0/2/1.2 usbcomposite
Oct 12 03:08:05 suthvm06 vmunix: 0/0/2/1.2.0 hid
Oct 12 03:08:05 suthvm06 vmunix: 0/0/2/1.2.1 hid
Oct 12 03:08:05 suthvm06 sfd[3022]: started 'insf' to create device special files for newly found devices.
Oct 12 03:08:06 suthvm06 sfd[3022]: execution of 'insf' completed.
Oct 12 03:08:16 suthvm06 vmunix: 0/0/2/1.2 usbcomposite
Oct 12 03:08:16 suthvm06 vmunix: 0/0/2/1.2.0 hid
Oct 12 03:08:16 suthvm06 vmunix: 0/0/2/1.2.1 hid
Oct 12 03:08:16 suthvm06 sfd[3022]: started 'insf' to create device special files for newly found devices.
Oct 12 03:08:16 suthvm06 sfd[3022]: execution of 'insf' completed.
Oct 12 03:08:19 suthvm06 vmunix: 0/0/2/1.2 usbcomposite
Oct 12 03:08:19 suthvm06 vmunix: 0/0/2/1.2.0 hid
Oct 12 03:08:19 suthvm06 vmunix: 0/0/2/1.2.1 hid
Oct 12 03:08:19 suthvm06 sfd[3022]: started 'insf' to create device special files for newly found devices.
Oct 12 03:08:19 suthvm06 sfd[3022]: execution of 'insf' completed.
Oct 12 03:08:43 suthvm06 vmunix: 0/0/2/1.2 usbcomposite
Oct 12 03:08:43 suthvm06 vmunix: 0/0/2/1.2.0 hid
Oct 12 03:08:43 suthvm06 vmunix: 0/0/2/1.2.1 hid
Oct 12 03:08:43 suthvm06 sfd[3022]: started 'insf' to create device special files for newly found devices.
Oct 12 03:08:43 suthvm06 sfd[3022]: execution of 'insf' completed.
Oct 12 03:16:35 suthvm06 vmunix:
Oct 12 03:16:35 suthvm06 vmunix: Shutting down machine, please wait.

Regards
Honored Contributor
Duncan Edmonstone
Posts: 5,684
Registered: ‎08-05-2000
Message 2 of 5 (734 Views)

Re: insf => usbcomposite then shutdown

Oct 12 03:07:53 suthvm06 vmunix: 0/0/2/1.2 usbcomposite
Oct 12 03:07:53 suthvm06 vmunix: 0/0/2/1.2.0 hid
Oct 12 03:07:53 suthvm06 vmunix: 0/0/2/1.2.1 hid

 On a rx6600 those paths look like the Core I/O USB ports on th rear of the system - hid = human interface device, so possibly someone tried to plug in a USB mouse and keyboard?

 

Not convined that this would have caused the system to reboot though - anything in /etc/shutdownlog that corresponds to this time?


HTH

Duncan
Acclaimed Contributor
Torsten.
Posts: 23,451
Registered: ‎10-02-2001
Message 3 of 5 (731 Views)

Re: insf => usbcomposite then shutdown

What does the shutdownlog say?

Looks like someone did a shutdown ...

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Honored Contributor
Patrick Wallek
Posts: 13,787
Registered: ‎06-21-2000
Message 4 of 5 (726 Views)

Re: insf => usbcomposite then shutdown

One thing I see is that there was approximately 8 minutes between the 'insf' and when the system went down.  Because of that time difference, I seriously doubt that the 'insf' had anything to do with the system going down.

 

Agree with those above that the /etc/shutdownlog should shed some light on this.

Valued Contributor
srayfay
Posts: 38
Registered: ‎12-02-2011
Message 5 of 5 (691 Views)

Re: insf => usbcomposite then shutdown

Hello,

 

the shutdown log doesn't say anything

I figured out from the MP logs, that the power supply is KO, then someone has powerd off the server ...

 

mp-rx6600-6-09] MP:CM> PS


PS
For System Processor Status see the SS command.
System Power state: On
System Power usage: 1078Watts
Temperature : Normal


Power supplies State
-----------------------------------------------------------
Power Supply 0 Normal
Power Supply 1 Predictive Failure asserted

Fans State
-----------------------------------------------------------
System Fan 1 Normal
System Fan 2 Normal
System Fan 3 Normal
System Fan 4 Normal
System Fan 5 Normal
System Fan 6 Normal

 

 

MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >


# Location|Alert| Encoded Field | Data Field | Keyword / Timestamp
-------------------------------------------------------------------------------
410 HPUX 0 2 0x5F801C2F00E022B0 0000000000001001 HP-UX_BOOT_COMPLETE
12 Oct 2012 01:21:20
409 SFW 0 2 0x40801CBB00E02290 0000000000000000 BOOT_SWITCH_INSECURE_MODE
12 Oct 2012 01:19:33
408 SFW 0 2 0x408000AA00E02270 0000000000000000 MEM_DIMM_DISTRIBUTION_WARN
12 Oct 2012 01:17:51
407 SFW 0 2 0x5480006300E02250 0000000000000000 BOOT_START
12 Oct 2012 01:17:41
406 SFW 2 0xC150776FB5022240 FFFF000A001D0300 CPU_START_BOOT
12 Oct 2012 01:17:41
405 BMC 2 0x2050776F97022230 FFFF010943090300 POWER_UNIT_ENABLED
12 Oct 2012 01:17:11
404 BMC *3 0x2050776F97022220 FFFF036F41080300 POWER_SUPPLY_AC_LOST
12 Oct 2012 01:17:11
403 BMC 2 0x2050776F96022210 FFFF027000120300 SOFT_RESET
12 Oct 2012 01:17:10
402 BMC 2 0x2050776F8B022200 0401A37004120300 CHASSIS_CONTROL_REQUEST
12 Oct 2012 01:16:59


MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >


# Location|Alert| Encoded Field | Data Field | Keyword / Timestamp
-------------------------------------------------------------------------------
401 BMC 2 0x2050776F8B0221F0 FFFF006F04140300 POWER_BUTTON_PRESSED
12 Oct 2012 01:16:59
400 BMC 2 0x2050776F8A0221E0 FFFF006FFA220300 ACPI_ON
12 Oct 2012 01:16:58
399 BMC 2 0x2050776F8A0221D0 FFFF027000120300 SOFT_RESET
12 Oct 2012 01:16:58
398 BMC 2 0x2050776F7F0221C0 FFFF000943090300 POWER_UNIT_DISABLED
12 Oct 2012 01:16:47
397 BMC 2 0x2050776F790221B0 0400A37004120300 CHASSIS_CONTROL_REQUEST
12 Oct 2012 01:16:41
396 BMC 2 0x2050776F750221A0 FFFF006F04140300 POWER_BUTTON_PRESSED
12 Oct 2012 01:16:37
395 BMC 2 0x2050776F73022190 040EA37004120300 CHASSIS_CONTROL_REQUEST
12 Oct 2012 01:16:35
394 BMC 2 0x2050776F71022180 FFFF006F04140300 POWER_BUTTON_PRESSED
12 Oct 2012 01:16:33
393 BMC 2 0x2050775C66022170 FFFF010B4F090300 POWER_REDUNDANCY_LOST
11 Oct 2012 23:55:18


MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >


# Location|Alert| Encoded Field | Data Field | Keyword / Timestamp
-------------------------------------------------------------------------------
392 BMC *3 0x2050775C66022160 FFFF036F41080300 POWER_SUPPLY_AC_LOST
11 Oct 2012 23:55:18

 

 

 

an exchange of power suplly is planning by HP Support

 

Thanks for all

Regards
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.