Re: indifferent fcmsutil output (644 Views)
Reply
Frequent Advisor
Sachin Kumbla
Posts: 45
Registered: ‎12-27-2007
Message 1 of 12 (646 Views)

indifferent fcmsutil output

when i run the following command
#ioscan -fnC fc :--> i get the following o/p

Class I H/W Path Driver S/W State H/W Type Description
=================================================================
fc 0 0/2/1/0 fcd CLAIMED INTERFACE HP A6826-60001 2Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd0
fc 1 0/2/1/1 fcd CLAIMED INTERFACE HP A6826-60001 2Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 2)
/dev/fcd1
fc 2 0/5/1/0 fcd CLAIMED INTERFACE HP A6826-60001 2Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd2
fc 3 0/5/1/1 fcd CLAIMED INTERFACE HP A6826-60001 2Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 2)
/dev/fcd3


when i run the following command

fcmsutil /dev/fcd2 ---> iam getting the foll.o/p


Error : Invalid device file
*************************************************************************
***** IOCTL functions available to the FCD driver *****
*************************************************************************

fcmsutil < FCD device_file >
< FCD device_file > echo [data_size] [count]
< FCD device_file > test [data_size] [count]
< FCD device_file > rls
< FCD device_file > [-f] lb {ext | int} {crpat | cjtpat} [count]
< FCD device_file > read_cr
< FCD device_file > read [pci]
< FCD device_file > vpd
< FCD device_file > sfp
< FCD device_file > get fabric
< FCD device_file > get remote {all | }
< FCD device_file > [-k] ns_query_ports
< FCD device_file > [-f] reset
< FCD device_file > [-f] bdr
< FCD device_file > replace_dsk
< FCD device_file > stat [-s]
< FCD device_file > clear_stat
< FCD device_file > nsstat
< FCD device_file > clear_nsstat
< FCD device_file > devstat {all | }
< FCD device_file > clear_devstat {all | }
< FCD device file > enable
< FCD device file > [-f] disable
< FCD device file > [-f] dump_current_state
< FCD device file > dump_saved_state
< FCD device_file > dump_nvram
< FCD device file > rom_fw_update
< FCD device file > efi_drv_update
< FCD device_file > [-f] set_int_delay {off | [-z {5 | 6}] }
< FCD device_file > get_int_delay

Note: can be substituted with -w
or -l (only in PRIVATE_LOOP) for all options
that take as an argument.

*************************************************************************
***** IOCTL functions available to the TD driver *****
*************************************************************************

fcmsutil < TD device_file >
< TD device_file > echo [data_size] [count]
< TD device_file > test [data_size] [count]
< TD device_file > rls
< TD device_file > [-f] lb plm|crpat|cjtpat [count]
< TD device_file > read_cr
< TD device_file > read [pci]
< TD device_file > write [pci]
< TD device_file > vpd
< TD device_file > get fabric
< TD device_file > get remote {all | }
< TD device_file > [-k] ns_query_ports
< TD device_file > reset
< TD device_file > [-f] bdr
< TD device_file > replace_dsk
< TD device_file > stat [-s]
< TD device_file > clear_stat
< TD device_file > nsstat
< TD device_file > clear_nsstat
< TD device_file > devstat {all | }
< TD device_file > clear_devstat {all | }
< TD device file > enable
< TD device file > [-f] disable
Note: can be substituted with -w
or -l (only in PRIVATE_LOOP) for all options
that take as an argument.

my OS is hp-ux 11.23

please suggest

Please use plain text.
Honored Contributor
Jeeshan
Posts: 2,084
Registered: ‎11-05-2007
Message 2 of 12 (646 Views)

Re: indifferent fcmsutil output

are you getting saem o/p for all fc interface?

did you check with insf -e command to reinstall your hardware?

a warrior never quits
Please use plain text.
Honored Contributor
Darrel Louis
Posts: 856
Registered: ‎11-27-2000
Message 3 of 12 (646 Views)

Re: indifferent fcmsutil output

Sachin,

Do you see any messsages regarding your Fibre in your syslog?
After you've run the ioscan -fn;insf -e commands please try again.
# fcmsutil /dev/fcd0
# fcmsutil /dev/fcd1
# fcmsutil /dev/fcd2
# fcmsutil /dev/fcd3

Also check with swlist if you've the correct driver software installed for the FC.
Can you also check with cstm if you see any problems, regarding your FC.
# cstm
cstm> map all
cstm> sel dev ;info
cstm> il

Goodluck
Darrel
Please use plain text.
Frequent Advisor
Sachin Kumbla
Posts: 45
Registered: ‎12-27-2007
Message 4 of 12 (646 Views)

Re: indifferent fcmsutil output

i have executed insf on that hardware path
Please use plain text.
Frequent Advisor
Sachin Kumbla
Posts: 45
Registered: ‎12-27-2007
Message 5 of 12 (646 Views)

Re: indifferent fcmsutil output

there are no messages in syslog.
in ioscan -fnC fc it shows all the fc cards are claimed.the only issue is that i cannot view the deatils of the fc card using the fcmsutil command.is there any patch for running the fcmsutil command in hp-ux 11.23
Please use plain text.
Honored Contributor
Jeeshan
Posts: 2,084
Registered: ‎11-05-2007
Message 6 of 12 (646 Views)

Re: indifferent fcmsutil output

did you install latest HWEnable11i patch?
a warrior never quits
Please use plain text.
Frequent Advisor
Sachin Kumbla
Posts: 45
Registered: ‎12-27-2007
Message 7 of 12 (646 Views)

Re: indifferent fcmsutil output

swlist |grep -i HWEnable*
HWEnable11i B.11.23.0505.022b Hardware Enablement Patches for HP-UX 11i v2, May 2005

it is installed
Please use plain text.
Frequent Advisor
Stuart Urquhart
Posts: 44
Registered: ‎06-07-2000
Message 8 of 12 (646 Views)

Re: indifferent fcmsutil output

Try tdutil instead of fcmsutil.
Please use plain text.
Frequent Advisor
Sachin Kumbla
Posts: 45
Registered: ‎12-27-2007
Message 9 of 12 (646 Views)

Re: indifferent fcmsutil output

/opt/fcms/bin/tdutil /dev/fcd0
ERROR: The installed driver and tdutil are not compatible
Please use plain text.
Honored Contributor
Duncan Edmonstone
Posts: 5,678
Registered: ‎08-05-2000
Message 10 of 12 (646 Views)

Re: indifferent fcmsutil output

And did you install the patches and products required for the fcd driver?

http://docs.hp.com/en/J6374-90061/ar01s05.html?btnNext=next%A0%BB

HTH

Duncan

HTH

Duncan
Please use plain text.
Honored Contributor
Eric SAUBIGNAC
Posts: 947
Registered: ‎01-10-2001
Message 11 of 12 (644 Views)

Re: indifferent fcmsutil output

Bonjour,

Is your HP-UX box supported with this card ? Check "Fibre channel adapters
specifications" at http://www.hp.com/products1/serverconnectivity/storagesnf2/adapter15/specifications/index.html


You should also upgrade to latest revision of "FibrChanl-01". What about "swlist FibrChanl-01". Latest is "B.11.23.08.02".

Finally you could also have to upgrade FC cards themselves.

You will find Driver and Firmware at : http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=331475&p...

Hope this will help

Eric
Please use plain text.
Honored Contributor
Darrel Louis
Posts: 856
Registered: ‎11-27-2000
Message 12 of 12 (644 Views)

Re: indifferent fcmsutil output

Hi,

Can you please verify if you have the latest recommended fcms patch (PHKL_33827) or Latest PHKL_36143.

And also look for the latest software for your FC: http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=A6826A

Goodluck
Darrel
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation