Re: Using evaperf on HPUX v3, EVA6100 (207 Views)
Reply
Regular Advisor
PatRoy
Posts: 160
Registered: ‎08-15-2006
Message 1 of 8 (207 Views)
Accepted Solution

Using evaperf on HPUX v3, EVA6100

Hi. I need to do some speed test with out EVA6100 from HPUX 11.31. Been told about evaperf.

Does anyone know where to get this, and know of a URL that will explain how to use this tool?

Thanks. PAt
Honored Contributor
Jeff Schussele
Posts: 6,795
Registered: ‎02-18-2002
Message 2 of 8 (207 Views)

Re: Using evaperf on HPUX v3, EVA6100

Try here:

javascript:openExternal('http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locBasepartNum=co-30754-1〈=English')

Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Regular Advisor
PatRoy
Posts: 160
Registered: ‎08-15-2006
Message 3 of 8 (207 Views)

Re: Using evaperf on HPUX v3, EVA6100

Im getting "The page you requested can not be found." :(
Honored Contributor
smatador
Posts: 628
Registered: ‎07-03-2002
Message 4 of 8 (207 Views)

Re: Using evaperf on HPUX v3, EVA6100

Hi,
Evaperf is part of CV, look this docs
http://h71028.www7.hp.com/ERC/downloads/5983-1674EN.pdf?jumpid=reg_R1002_USEN
Hope this helps
Honored Contributor
Jeff Schussele
Posts: 6,795
Registered: ‎02-18-2002
Message 5 of 8 (207 Views)

Re: Using evaperf on HPUX v3, EVA6100

Yep - sorry I should have checked.
Let me troll around further.

Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Honored Contributor
Jeff Schussele
Posts: 6,795
Registered: ‎02-18-2002
Message 6 of 8 (207 Views)

Re: Using evaperf on HPUX v3, EVA6100

Hey PatRoy (Watch that left HAnd CAp :%)),

Here's the URL for the manual.
I suspect that if this is a "pay-for-use" product then you'll need to contact your HP Rep.
Else everything's available on software.hp.com.
Just search judiciously.
Try this;

http://h71028.www7.hp.com/ERC/downloads/5983-1674EN.pdf?jumpid=reg_R1002_USEN

Good Luck,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Regular Advisor
PatRoy
Posts: 160
Registered: ‎08-15-2006
Message 7 of 8 (207 Views)

Re: Using evaperf on HPUX v3, EVA6100

Thanks Jeff ;)

I've printed out the white papers... thanks! But where do I get the actual binary to run on hpux 11.31 (v3)

The PDF leads me to
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=471498&p...


But that only seems to have the v1, v2 version... ??
Honored Contributor
smatador
Posts: 628
Registered: ‎07-03-2002
Message 8 of 8 (207 Views)

Re: Using evaperf on HPUX v3, EVA6100

Hi,
Install cv on windows, you will get the evaperf. You should interact with the windows cv to you hpux 11.31 box
Look at the releases notes
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.