System getting hang while using command (278 Views)
Reply
Advisor
expertone
Posts: 28
Registered: ‎03-11-2013
Message 1 of 5 (278 Views)

System getting hang while using command

Hi friends,

 

While i am using any commands in my HP_UX my server is getting hang .. Can any body please help out ASAP

 

Output of my TOP command

System: gcldevqa Thu Dec 5 16:18:49 2013
Load averages: 0.48, 0.53, 0.51
441 processes: 364 sleeping, 60 running, 15 stopped, 2 zombies
Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 0.15 1.4% 0.0% 0.6% 98.0% 0.0% 0.0% 0.0% 0.0%
1 0.14 0.4% 0.0% 1.8% 97.8% 0.0% 0.0% 0.0% 0.0%
2 1.44 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0% 0.0%
3 0.18 0.2% 0.0% 1.8% 98.0% 0.0% 0.0% 0.0% 0.0%
--- ---- ----- ----- ----- ----- ----- ----- ----- -----
avg 0.48 0.6% 0.0% 25.9% 73.5% 0.0% 0.0% 0.0% 0.0%

System Page Size: 4Kbytes
Memory: 17382956K (3665812K) real, 54452636K (14884528K) virtual, 41084K free Page# 1/16

 

Advisor
gnana prakasam
Posts: 27
Registered: ‎01-16-2010
Message 2 of 5 (261 Views)

Re: System getting hang while using command

Hi ,

 

Please provide some more details like System ,Memory & etc ..

 

 

That should be related to System Physical memory or Root disk issues...

 

Advisor
expertone
Posts: 28
Registered: ‎03-11-2013
Message 3 of 5 (244 Views)

Re: System getting hang while using command

yes i have checked that, and my root disk utilization is around 100% most of the times or around it. 

 

So what i can do to resolve this???

Acclaimed Contributor
Dennis Handly
Posts: 25,292
Registered: ‎03-06-2006
Message 4 of 5 (242 Views)

Re: System getting hang while using command

[ Edited ]

>my root disk utilization is around 100% most of the times

 

You need to clean up your disk space usage.  If /tmp or /var/tmp are on /, you need to make sure there are no large files.

You need to make sure if there were large files, you didn't remove them while they were still open.

Trusted Contributor
singh sanjeev
Posts: 217
Registered: ‎11-07-2007
Message 5 of 5 (199 Views)

Re: System getting hang while using command

check for disk , may be it gone bad. check for vmunix error in dmesg/syslog/event.log.

 

Sanjeev Singh
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.