SC08e SAS hba card on RedHat (226 Views)
Reply
Super Advisor
Hanry Zhou
Posts: 1,158
Registered: ‎01-11-2002
Message 1 of 1 (226 Views)

SC08e SAS hba card on RedHat

[ Edited ]

I have installed HP SC08e 6Gb SAS card, and it uses mpt2sas driver. it looks like Linux picked it up successfuly. My questions are:

 

1.   Are there any tools I can setup RAID on 6 drives ?

2.   When I update the drive using this link, I got following errors, how do I resolve that?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=4204258&...

 

# rpm -Uvh /tmp/kmod-mpt2sas-5.10.05.00-4.rhel6u2.x86_64.rpm
error: Failed dependencies:
        kernel(sas_attach_transport) = 0x3f12aa8d is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_end_device_alloc) = 0x415f2e85 is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_expander_alloc) = 0x3beb77d7 is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_phy_add) = 0x98e30276 is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_phy_alloc) = 0xf7e2e3c9 is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_phy_free) = 0xe60b24e5 is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_port_add) = 0xebf739bd is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_port_add_phy) = 0x72984ea4 is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_port_alloc_num) = 0x5526cd93 is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_port_delete) = 0x052e72ae is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_port_delete_phy) = 0x1db232a8 is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64
        kernel(sas_rphy_add) = 0xfad4ef3a is needed by kmod-mpt2sas-5.10.05.00-4.el6.x86_64

 

 

 

Thanks a lot

none
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation