Re: Not able to do fsck (181 Views)
Reply
Advisor
josinjosek
Posts: 39
Registered: ‎05-15-2007
Message 1 of 6 (181 Views)
Accepted Solution

Not able to do fsck

I am not able to mount /var partition. when I am doing fsck I am getting below error. please help me to resolve the issue.


# fsck -F vxfs -o full /dev/vg00/lvol33
vxfs fsck: file system had I/O error(s) on meta-data.
intent log marked bad in super-block
cannot perform log replay
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
au 40 state file incorrect - fix? (ynq)y
OK to clear log? (ynq)y
vxfs fsck: error writing LOG inode
file system check failure, aborting ...
Please use plain text.
Honored Contributor
Robert-Jan Goossens
Posts: 7,384
Registered: ‎04-04-2000
Message 2 of 6 (181 Views)

Re: Not able to do fsck

Hi,

Use the raw device.

# fsck -F vxfs -o full /dev/vg00/rlvol33

Regards,
Robert-Jan
Please use plain text.
Regular Advisor
subodhbagade
Posts: 132
Registered: ‎06-08-2008
Message 3 of 6 (181 Views)

Re: Not able to do fsck

Hi,

To Repair the file system

# fsck -F vxfs -o full -y /dev/vg00/rlvol33

( yes to all )

Then try to mount the file system


Regards,
Subodh
Please use plain text.
Advisor
josinjosek
Posts: 39
Registered: ‎05-15-2007
Message 4 of 6 (181 Views)

Re: Not able to do fsck

I tried raw device but that also is not working so I tried to ignite the server, then I am getting below error.

Main Menu: Enter command or menu > bo lan.XXXXXXXX install
Interact with IPL (Y, N, or Cancel)?> n

Booting...
Failed to initialize.

ENTRY_INIT
Status = -4

00000000 00000000 00000000 00000000 00000000 00000030 00000000 6E48E7BC
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000005 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000007 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

Failed to initialize.
Please use plain text.
Honored Contributor
V. Nyga
Posts: 4,874
Registered: ‎09-20-2002
Message 5 of 6 (181 Views)

Re: Not able to do fsck

Hi,

well it seems like the hard disk is damaged.
Replace it, then use ignite.

HTH
Volkmar

P.S.
A copy test 'dd' to /dev/null would also be a test to verify if the disk is damaged.
*** Say 'Thanks' with Kudos ***
Please use plain text.
Honored Contributor
Hakki Aydin Ucar
Posts: 1,313
Registered: ‎08-16-2006
Message 6 of 6 (181 Views)

Re: Not able to do fsck

Check the bad blocks on your disk to be sure:
lvdisplay -v /dev/vg00/lvol33

and then put disk dev below;

echo 2400?20X | adb /dev/dsk/cXtYd0
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation