Re: IO Tree, will not be added to the _hp_hide_other_disks list (741 Views)
Reply
Regular Advisor
itrc55
Posts: 195
Registered: ‎04-10-2010
Message 1 of 4 (751 Views)
Accepted Solution

IO Tree, will not be added to the _hp_hide_other_disks list

Hi All,

I got some error while taking ignite backup with make_net_recovery command

the errors are below:


WARNING: Failed to find "/dev/vx/dsk/mph011-dg" in IOTree, will not be added to
         the _hp_hide_other_disks list
WARNING: Failed to find "/dev/vx/dsk/mdmrac-dg" in IOTree, will not be added to
         the _hp_hide_other_disks list
WARNING: Failed to find "/dev/vx/dsk/mdmrac-dg" in IOTree, will not be added to
         the _hp_hide_other_disks list
WARNING: Failed to find "/dev/vx/dsk/mdmrac-dg" in IOTree, will not be added to
         the _hp_hide_other_disks list

 

please check the attached file for more details

where this VCS filesystem is not including on the backup process, but it's mounted and available on /etc/fstab file.

Note: when i run the make_net_recovery command by root user i don't facing the above warning, but when i run it by user has sudo root privileges i facing the above warning


Thanks in advance

Acclaimed Contributor
Dennis Handly
Posts: 25,274
Registered: ‎03-06-2006
Message 2 of 4 (750 Views)

Re: IO Tree, will not be added to the _hp_hide_other_disks list

[ Edited ]

You're getting a bunch of errors like: sh: vxdmpadm: not found.

 

It seems your PATH isn't correct.  (It may need /usr/sbin/.)

Regular Advisor
itrc55
Posts: 195
Registered: ‎04-10-2010
Message 3 of 4 (742 Views)

Re: IO Tree, will not be added to the _hp_hide_other_disks list

Hi,

 

can you explain more ?

 

Thanks

Regular Advisor
itrc55
Posts: 195
Registered: ‎04-10-2010
Message 4 of 4 (741 Views)

Re: IO Tree, will not be added to the _hp_hide_other_disks list

[ Edited ]

Hi,

thanks so much after set correct profile and path for normal user it's working without any issue

 

where the profile of this user is

 

Before

>>>>>>>>>>>>>>>>>>>>>>>>>>>

$ cat .profile

# @(#)B.11.31_LR

# Default user .profile file (/usr/bin/sh initialization).

# Set up the terminal:
        if [ "$TERM" = "" ]
        then
                eval ` tset -s -Q -m ':?hp' `
        else
                eval ` tset -s -Q `
        fi
        stty erase "^H" kill "^U" intr "^C" eof "^D"
        stty hupcl ixon ixoff
        tabs

# NOTE: '.' is added to $PATH for compatibility reasons only. This
#       default will be changed in a future release. If "." is not
#       needed for compatibility it is better to omit this line.
#       Please edit .profile according to your site requirements.

# Set up the search paths:
        PATH=$PATH:.

# Set up the shell environment:
        set -u
        trap "echo 'logout'" 0

# Set up the shell variables:
        EDITOR=vi
        export EDITOR

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

 

After

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

# @(#)B.11.31_LR

# Default (example of) super-user's .profile file


# Do not put "." in PATH; it is a potential security breach.
# Do not put "/usr/local/bin" in PATH; it is a potential security breach.
# Example assumes /home/root exists.
        set +u

        PATH=/usr/sbin:$PATH:/sbin:/home/root

# Be sure that VUE does not invoke tty commands

   if [ ! "$VUE" ]; then

   # Set up the terminal:
        if [ "$TERM" = "" ]
        then
                eval ` tset -s -Q -m ':?hp' `
        else
                eval ` tset -s -Q `
        fi
        stty erase "^H" kill "^U" intr "^C" eof "^D"
        stty hupcl ixon ixoff
        tabs

        echo
        echo "Value of TERM has been set to \"$TERM\". "
        export TERM

        EDITOR=vi
        export EDITOR

   fi          # if !VUE


# Set up shell environment:

        set -u                                  # error if undefined variable.
        trap "echo 'logout root'" 0             # what to do on exit.


# Set up shell variables:

        MAIL=/var/mail/root
        # don't export, so only login shell checks.

        echo "WARNING:  YOU ARE SUPERUSER !!\n"
export TERM=vt100
export PS1="$(hostname) #"
stty erase ^?
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

Thanks

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.