Re: IO Tree, will not be added to the _hp_hide_other_disks list (490 Views)
Reply
Regular Advisor
itrc55
Posts: 195
Registered: ‎04-10-2010
Message 1 of 4 (491 Views)
Accepted Solution

IO Tree, will not be added to the _hp_hide_other_disks list

Hi All,

I got some error while taking ignite backup with make_net_recovery command

the errors are below:


WARNING: Failed to find "/dev/vx/dsk/mph011-dg" in IOTree, will not be added to
         the _hp_hide_other_disks list
WARNING: Failed to find "/dev/vx/dsk/mdmrac-dg" in IOTree, will not be added to
         the _hp_hide_other_disks list
WARNING: Failed to find "/dev/vx/dsk/mdmrac-dg" in IOTree, will not be added to
         the _hp_hide_other_disks list
WARNING: Failed to find "/dev/vx/dsk/mdmrac-dg" in IOTree, will not be added to
         the _hp_hide_other_disks list

 

please check the attached file for more details

where this VCS filesystem is not including on the backup process, but it's mounted and available on /etc/fstab file.

Note: when i run the make_net_recovery command by root user i don't facing the above warning, but when i run it by user has sudo root privileges i facing the above warning


Thanks in advance

Please use plain text.
Acclaimed Contributor
Dennis Handly
Posts: 24,383
Registered: ‎03-06-2006
Message 2 of 4 (490 Views)

Re: IO Tree, will not be added to the _hp_hide_other_disks list

[ Edited ]

You're getting a bunch of errors like: sh: vxdmpadm: not found.

 

It seems your PATH isn't correct.  (It may need /usr/sbin/.)

Please use plain text.
Regular Advisor
itrc55
Posts: 195
Registered: ‎04-10-2010
Message 3 of 4 (482 Views)

Re: IO Tree, will not be added to the _hp_hide_other_disks list

Hi,

 

can you explain more ?

 

Thanks

Please use plain text.
Regular Advisor
itrc55
Posts: 195
Registered: ‎04-10-2010
Message 4 of 4 (481 Views)

Re: IO Tree, will not be added to the _hp_hide_other_disks list

[ Edited ]

Hi,

thanks so much after set correct profile and path for normal user it's working without any issue

 

where the profile of this user is

 

Before

>>>>>>>>>>>>>>>>>>>>>>>>>>>

$ cat .profile

# @(#)B.11.31_LR

# Default user .profile file (/usr/bin/sh initialization).

# Set up the terminal:
        if [ "$TERM" = "" ]
        then
                eval ` tset -s -Q -m ':?hp' `
        else
                eval ` tset -s -Q `
        fi
        stty erase "^H" kill "^U" intr "^C" eof "^D"
        stty hupcl ixon ixoff
        tabs

# NOTE: '.' is added to $PATH for compatibility reasons only. This
#       default will be changed in a future release. If "." is not
#       needed for compatibility it is better to omit this line.
#       Please edit .profile according to your site requirements.

# Set up the search paths:
        PATH=$PATH:.

# Set up the shell environment:
        set -u
        trap "echo 'logout'" 0

# Set up the shell variables:
        EDITOR=vi
        export EDITOR

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

 

After

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

# @(#)B.11.31_LR

# Default (example of) super-user's .profile file


# Do not put "." in PATH; it is a potential security breach.
# Do not put "/usr/local/bin" in PATH; it is a potential security breach.
# Example assumes /home/root exists.
        set +u

        PATH=/usr/sbin:$PATH:/sbin:/home/root

# Be sure that VUE does not invoke tty commands

   if [ ! "$VUE" ]; then

   # Set up the terminal:
        if [ "$TERM" = "" ]
        then
                eval ` tset -s -Q -m ':?hp' `
        else
                eval ` tset -s -Q `
        fi
        stty erase "^H" kill "^U" intr "^C" eof "^D"
        stty hupcl ixon ixoff
        tabs

        echo
        echo "Value of TERM has been set to \"$TERM\". "
        export TERM

        EDITOR=vi
        export EDITOR

   fi          # if !VUE


# Set up shell environment:

        set -u                                  # error if undefined variable.
        trap "echo 'logout root'" 0             # what to do on exit.


# Set up shell variables:

        MAIL=/var/mail/root
        # don't export, so only login shell checks.

        echo "WARNING:  YOU ARE SUPERUSER !!\n"
export TERM=vt100
export PS1="$(hostname) #"
stty erase ^?
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

Thanks

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation