Execute the command to reset all the cache bits. (32 Views)
Reply
Occasional Visitor
James Crandall
Posts: 1
Registered: ‎05-17-2007
Message 1 of 1 (32 Views)

Execute the command to reset all the cache bits.

[ Edited ]

I'm getting the following EMS notification and I just need to know how to "reset all the cache bits".

Thanks in advance -- James C.

>------------ Event Monitoring Service Event Notification ------------<

Notification Time: Thu May 17 07:32:10 2007

datatel1.shastacollege.edu sent Event Monitor notification information:

/storage/events/disk_arrays/FC60/001E00A0B807A2B2
is >= 3.
Its current value is CRITICAL(5).



Event data from monitor:

Event Time..........: Thu May 17 07:32:10 2007
Severity............: CRITICAL
Monitor.............: fc60mon
Event #.............: 30
System..............: datatel1.shastacollege.edu

Summary:
Disk Array at hardware path :
Array at hardware path 1/0/2/0/0.8.0.5.0.0.0, path 1/0/4/0/0.8.0.4.0.0.0: The
logical unit 31 has
the Cache Mirror Enable bit disabled.



Description of Error:


This event message is displayed when the Cache Mirror Enable
bit has been disabled.


Probable Cause / Recommended Action:


Execute the command to reset all the cache bits.

Additional Event Data&colon;
System IP Address...: 10.3.3.50
Event Id............: 0x464c676a00000001
Monitor Version.....: B.01.01
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_fc60mon.clcfg
Client Configuration File Version...: A.01.01
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data&colon;
System Model Number.............: 9000/800/rp7410
EMS Version.....................: A.03.20
STM Version.....................: A.31.00
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/fc60mon.htm#30

v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v



Product/Device Data&colon;

Logger ID.........: (not available/applicable)
Product Identifier: (not available/applicable)
Product Qualifier.: (not available/applicable)
SCSI Target ID....: (not available/applicable)
SCSI LUN..........: (not available/applicable)


>---------- End Event Monitoring Service Event Notification ----------<

 

 

P.S. This thread has been moevd from disk to HP-UX > sysadmin. - Hp forum Moderator

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.