Re: Error when mount DVD I/O error in HPUX 11.31 (619 Views)
Reply
Advisor
mohd280
Posts: 16
Registered: ‎08-29-2011
Message 1 of 6 (688 Views)
Accepted Solution

Error when mount DVD I/O error in HPUX 11.31

Hi ,

 

 It is very simple but not working !!!!

 

 

======================================

 

# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
disk 0 0/0/0/1/0/0/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d0 /dev/dsk/c0t0d0s2 /dev/rdsk/c0t0d0 /dev/rdsk/c0t0d0s2
/dev/dsk/c0t0d0s1 /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s1 /dev/rdsk/c0t0d0s3
disk 1 0/0/0/1/0/0/0.0.1 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d1 /dev/rdsk/c0t0d1
disk 2 0/0/0/31/2.0.0 sdisk CLAIMED DEVICE hp DVD A DS8A8SH
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
#
# mount -F cdfs /dev/dsk/c1t0d0 /DVD
/dev/dsk/c1t0d0: I/O error
#

 

 

================================

 

Thank you in advance. 

Honored Contributor
Bill Hassell
Posts: 14,210
Registered: ‎05-29-2000
Message 2 of 6 (656 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

Put an HP-UX CD or DVD in and try again. HP-UX understands only a few CD/DVD formats.

Regular Advisor
Ajin_1
Posts: 202
Registered: ‎06-09-2009
Message 3 of 6 (644 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

Hi
May be its Drive Problem.Also please check the mount point also
Thanks & Regards
Ajin.S
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Acclaimed Contributor
Torsten.
Posts: 23,390
Registered: ‎10-02-2001
Message 4 of 6 (642 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

[ Edited ]

It may depend on the CD/DVD format.

Why not try to mount the ISO?

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=ISOIMAGE-ENH

 

 

Depending on your server hardware you may also try virtual media (mount the media over ILO).


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Honored Contributor
Robert_Jewell
Posts: 1,238
Registered: ‎06-26-2001
Message 5 of 6 (622 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

Something else to be sure is that your mount point isnt being accessed.  I ran into a similar issue and found that the mount point I was trying to use was currently being exported.

 

-Bob

Advisor
mohd280
Posts: 16
Registered: ‎08-29-2011
Message 6 of 6 (619 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

Thank you all . The DC guy said DVD is there while apparently not .

It was DVD not inserted ! sorry for someone mistake :)
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.