Re: Error when mount DVD I/O error in HPUX 11.31 (432 Views)
Reply
Advisor
mohd280
Posts: 16
Registered: ‎08-29-2011
Message 1 of 6 (478 Views)
Accepted Solution

Error when mount DVD I/O error in HPUX 11.31

Hi ,

 

 It is very simple but not working !!!!

 

 

======================================

 

# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
disk 0 0/0/0/1/0/0/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d0 /dev/dsk/c0t0d0s2 /dev/rdsk/c0t0d0 /dev/rdsk/c0t0d0s2
/dev/dsk/c0t0d0s1 /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s1 /dev/rdsk/c0t0d0s3
disk 1 0/0/0/1/0/0/0.0.1 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d1 /dev/rdsk/c0t0d1
disk 2 0/0/0/31/2.0.0 sdisk CLAIMED DEVICE hp DVD A DS8A8SH
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
#
# mount -F cdfs /dev/dsk/c1t0d0 /DVD
/dev/dsk/c1t0d0: I/O error
#

 

 

================================

 

Thank you in advance. 

Please use plain text.
Honored Contributor
Bill Hassell
Posts: 14,198
Registered: ‎05-29-2000
Message 2 of 6 (446 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

Put an HP-UX CD or DVD in and try again. HP-UX understands only a few CD/DVD formats.

Please use plain text.
Regular Advisor
Ajin_1
Posts: 200
Registered: ‎06-09-2009
Message 3 of 6 (434 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

Hi
May be its Drive Problem.Also please check the mount point also
Thanks & Regards
Ajin.S
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,187
Registered: ‎10-02-2001
Message 4 of 6 (432 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

[ Edited ]

It may depend on the CD/DVD format.

Why not try to mount the ISO?

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=ISOIMAGE-ENH

 

 

Depending on your server hardware you may also try virtual media (mount the media over ILO).


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Honored Contributor
Robert_Jewell
Posts: 1,230
Registered: ‎06-26-2001
Message 5 of 6 (412 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

Something else to be sure is that your mount point isnt being accessed.  I ran into a similar issue and found that the mount point I was trying to use was currently being exported.

 

-Bob

Please use plain text.
Advisor
mohd280
Posts: 16
Registered: ‎08-29-2011
Message 6 of 6 (409 Views)

Re: Error when mount DVD I/O error in HPUX 11.31

Thank you all . The DC guy said DVD is there while apparently not .

It was DVD not inserted ! sorry for someone mistake :)
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation