Re: HP2626 VLAN J4900B (115 Views)
Reply
Occasional Visitor
brentdesalvo
Posts: 1
Registered: ‎12-20-2012
Message 1 of 2 (117 Views)

HP2626 VLAN J4900B

Need info to setup 4 VLANS on HP2626 J4900

 

have tried to configure it with no success, so it is now at factory defaults

I would like to configure it as follows:

 

 

VLAN 1 (Ntwk1)

10.1.1.0 port 1-8

 

 

VLAN 2(ntwk2)

134.137.36.0 Ports 9-14

 

 

VLAN 3(ntwk3)

11.1.233.0  Port 15-18

 

VLAN 4(ntwk4)

11.101.1.0  Ports 19-24

 

port 26 is GBIC to another 2626 switch setup the same way need all traffic to pass out port 26 to other switch as well , but if not connected the switch still operates just fine locally with about vlans

 

Thanks

Honored Contributor
cenk sasmaztin
Posts: 1,435
Registered: ‎04-02-2008
Message 2 of 2 (115 Views)

Re: HP2626 VLAN J4900B

hi copy and paste two switch this config

 

SW 1-----------------------


vlan 1
   name "DEFAULT_VLAN"
   untagged 1-8,25,26
   ip address 10.1.1.1 255.255.255.0
   no untagged 9-24
   exit
vlan 2
   name "VLAN2"
   untagged 9-14
   tag 25,26
   ip address 134.137.36.1 255.255.255.0
   exit
vlan 3
   name "VLAN3"
   untagged 15-18
   tag 25,26
   ip address 11.1.233.1 255.255.255.0
   exit
vlan 4
   name "VLAN4"
   untagged 19-24
   tag 25,26
   ip address 11.101.1.1 255.255.255.0
   exit



SW2----------------------------------------

vlan 1
   name "DEFAULT_VLAN"
   untagged 1-8,25,26
   ip address 10.1.1.2 255.255.255.0
   no untagged 9-24
   exit
vlan 2
   name "VLAN2"
   untagged 9-14
   tag 25,26
   exit
vlan 3
   name "VLAN3"
   untagged 15-18
   tag 25,26
   exit
vlan 4
   name "VLAN4"
   untagged 19-24
   tag 25,26
   exit

cenk

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.