07-19-2008 10:53 PM
We are fetching a problem. I need a help form you. We have a switch which is in the live running. I want to get in the HP Procurve Switch 2824. But I can not get in. I want to default user name and password. Or default configuration when this is new. Any one give me immediate response.
07-19-2008 11:43 PM
NO default password is set when the switch is new.
The default configuration is quit simple:
One default Vlan (Vlan1) with IP DHCP enabled on this Vlan, and it has 2 users built in: Manager & Operator with NO password set but you can configure other user names (Optional).
If you have a password already set on this switch, and you have physical access to the switch,
press and hold the Clear button (on the front of the switch) for a minimum of one second to clear all password protection.
You can also use the Reset button together with the Clear button (Reset+Clear) to restore the factory default configuration for the switch. To do this:
1. Press and hold the Reset button.
2. While holding the Reset button, press and hold the Clear button.
3. Release the Reset button and wait for about one second for the Self-Test LED to start flashing.
4. When the Self-Test LED begins flashing, release the Clear button
This process restores the switch configuration to the factory default settings.
You can have a look on the following link that explains with pictures how to do so:
Good Luck !!!
11-11-2008 07:23 AM
yanÄ±p sonmeye baslayÄ±nca 3-5 sn daha bekle
i like it