Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk (557 Views)
Reply
Occasional Contributor
Liu Yinli_1
Posts: 11
Registered: ‎11-10-2009
Message 1 of 12 (650 Views)
Accepted Solution

P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hi All,

 

Yesterday I changed a failed disk.

 

I have two questions.

 

1. There are 600GB disk x 12 in the disk group. The actual capacity should be 558GB x 12=6696GB. But in CV the total capacity of the disk group is 9563GB.

 

2. The Single protaction level is not available. But before the disk failed it is available. I think it will be available after I change a new disk. It seems that it does not add the new disk's capacity into the available capacity.

 

There is only one disk group. There are three vraid6 vdisks. The total capacity of these vdisks is 3300GB.

 

Thanks.

Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 2 of 12 (640 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Make sure all disks are grouped.
How about the disk group view?

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Contributor
Liu Yinli_1
Posts: 11
Registered: ‎11-10-2009
Message 3 of 12 (636 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hi Torsten,

 

Thank you.

 

All disks are grouped.

 

The attachment is the disk group  view.

 

Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 4 of 12 (626 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Ok, now I see.

The tital is even gretare than 12*600.

I would try first to boot the controllers one by one and see if this helps.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor
AndrewZhalnin
Posts: 6
Registered: ‎06-12-2013
Message 5 of 12 (606 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hi, Torsten!

Could you help me with this similar issue

Thanks a lot!

 

Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 6 of 12 (602 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Did the restart help?

The link is bad and should be

http://h30499.www3.hp.com/t5/Storage-Area-Networks-SAN/Migrate-issue/td-p/6101315#.UcwtjW3gUaM

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor
AndrewZhalnin
Posts: 6
Registered: ‎06-12-2013
Message 7 of 12 (599 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Thanks for reply!

I didn't restart. Should I restart both controllers at the same time or one by one?

Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 8 of 12 (597 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

First I would try one by one, so you can do this online.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor
AndrewZhalnin
Posts: 6
Registered: ‎06-12-2013
Message 9 of 12 (587 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

[ Edited ]

Hi!

I restarted controllers, but... the result is the same, unfortunately...

May be I was wrong with my calculations. Tell me please what is the formula for actually allocated space? I have vraid6 and vraid5 vdisks.

Trusted Contributor
susanta_dutta
Posts: 82
Registered: ‎11-19-2009
Message 10 of 12 (557 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hello Liu,

 

Can you please share the SSSU commands output. Refer the attached temaplate.

 

Regards

Susanta 

Occasional Contributor
Liu Yinli_1
Posts: 11
Registered: ‎11-10-2009
Message 11 of 12 (546 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hi Torsten, Thank you very much.

 

Just now I restarted the controller one by one. The total capacity is right and the protection level is Single now.

 

Thanks for susanta_dutta too.

Occasional Advisor
AndrewZhalnin
Posts: 6
Registered: ‎06-12-2013
Message 12 of 12 (528 Views)

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hi Torsten!

I realy have made wrong calculation uuups... => Everything is allright! The problem was with my head)))

Anyway thanks a lot! Goodluck!

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.