Re: Oracle 10g/11 on EVA5000 (159 Views)
Occasional Contributor
Posts: 6
Registered: ‎10-26-2010
Message 1 of 4 (159 Views)
Accepted Solution

Oracle 10g/11 on EVA5000

Hi all,

i hope this question belongs here.

I want to ask if anyone has experience with ORA datafiles on EVA5000,
and what would be the best settings for the DATAFILES to get the most performance out of the EVA.

i.e. Blocksize,Clustering etc

tips ,links and other infos are greatly appreciated

kind regards

Trusted Contributor
Posts: 249
Registered: ‎02-09-2007
Message 2 of 4 (159 Views)

Re: Oracle 10g/11 on EVA5000


Hm - we have a lot of Oracle databases running on a lot of EVA's, and don't do that much special stuff.

Blocksize should be 8K, as Oracle also uses. You would like to get as close to raw performance as possible, which makes you want to use some kind of direct IO enabling, or something like that, if your OS/filesystem-type presents these possibilities.

Frequent Advisor
Posts: 40
Registered: ‎02-01-2005
Message 3 of 4 (159 Views)

Re: Oracle 10g/11 on EVA5000

See Oracle mount options white paper (updated Sep'2010):

Few key snippets from the docu:

"With VxFS 5.0 on 11.31, the filesystem no longer needs to have a filesystem block size of 1 KB for efficient direct I/O."

"Beginning with VxFS 5.0.1or higher on HP-UX 11i v3, the concurrent I/O feature is available with the OnlineJFS licenses."

Also check your SCSI queue depth, default is 8, maximum 255.
Occasional Contributor
Posts: 6
Registered: ‎10-26-2010
Message 4 of 4 (159 Views)

Re: Oracle 10g/11 on EVA5000

Thanks for the answer guys.

Sadly im damned to use Windows as an operating system..., and the only thing,i found,on direct I/O was for win NT4.0

maybe im lucky and someone else is damned to use windows as an DB Server enviorment :)


The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.