Licenses in HP P6000 CommandView (370 Views)
Reply
Occasional Advisor
EvgeniyK
Posts: 10
Registered: ‎07-04-2013
Message 1 of 4 (370 Views)
Accepted Solution

Licenses in HP P6000 CommandView

Hello, all!

After install new version CommandView10.2 tab "Licensing" indicated:

Business Copy - 0 GB - 0 GB - Expires in 60 days
Continuous Access - 0 GB - 0 GB - Expires in 60 days
Performance Advisor - 0 GB - N/A - Expires in 60 days.

 

In old Command View (version: 10.1.0.120411) those look like this:
Business Copy - 0 GB - 0 GB - Not licensed
Continuous Access - 0 GB - 0 GB - Not licensed
Performance Advisor - 0 GB - N/A - Not licensed
The question is: how make new one like this?
New Command View version is: 10.2.0.121112

Thanks.

Esteemed Contributor
Greybeard
Posts: 392
Registered: ‎04-30-2008
Message 2 of 4 (367 Views)

Re: Licenses in HP P6000 CommandView

Hi a new install will come with the temp setup licenses, after the 60 day trial the unlicensed features will again look like the old version. Any features or capacity licenses you had must be re installed in order for those features to continue functioning.
_________________________________________________
How to assign points on this new forum? Click the Kudos Star!
Occasional Advisor
EvgeniyK
Posts: 10
Registered: ‎07-04-2013
Message 3 of 4 (364 Views)

Re: Licenses in HP P6000 CommandView

Thanks for help.

Esteemed Contributor
Greybeard
Posts: 392
Registered: ‎04-30-2008
Message 4 of 4 (357 Views)

Re: Licenses in HP P6000 CommandView

you're welcome, don't forget if this answered your question to mark as solved so others can find the answer too :)
_________________________________________________
How to assign points on this new forum? Click the Kudos Star!
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.