using hp p2000 SAN storage with ESX 5.1 (186 Views)
Reply
Occasional Contributor
bruce1946
Posts: 4
Registered: ‎07-09-2013
Message 1 of 4 (186 Views)

using hp p2000 SAN storage with ESX 5.1

Hi
I need to use a hp p2000 SAN storage which is connected to a HP Dl580 G7 server(with Fiber Channel) as a data archive.
the hp p2000 is not recognized in ESX
the scenario is to mount this storage in open-suse which is installed on the ESX as a machine.
the fiber channel lights on the server card are blinking with the red and orange light even when I plug out the fiber cable.
the storage version is (TS240P004).
I don not know anything about this VAAI which I see on the web.
kindly please guide me through this .

Honored Contributor
Johan Guldmyr
Posts: 3,853
Registered: ‎06-14-2009
Message 2 of 4 (172 Views)

Re: using hp p2000 SAN storage with ESX 5.1

Hi, if it's FC you also need to zone the P2000 to the ESX server and on the P2000 you need to create LUNs.

For VAAI read this one: http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=4AA3-5025ENW
Occasional Contributor
bruce1946
Posts: 4
Registered: ‎07-09-2013
Message 3 of 4 (148 Views)

Re: using hp p2000 SAN storage with ESX 5.1

[ Edited ]

how to zone hp p2000 and how to create LUNs?

also in drivers page :http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=4118572&spf_p...

there is afirmware with tha name of HP_HUS156030VLS600_A760.fla

how can I install this since my HDDs are SAS 600GB ?

TX

Honored Contributor
Johan Guldmyr
Posts: 3,853
Registered: ‎06-14-2009
Message 4 of 4 (141 Views)

Re: using hp p2000 SAN storage with ESX 5.1

How you zone depends on if you have a B- or a C-series SAN switch. If you don't have a SAN switch you don't need to zone, but you need to change the setting of the ports (on both P2000 and on the server).

 

To present a disk you create a map and allow the DL580 to see the volume you've created in the P2000.

 

Do you also have a  HP_HUS156030VLS600 DISK (check in SMU)?

Firmware upgrades are done in the SMU(the web interface of the P2000)  too.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.