Upgrading EVA4400 firmware & CommandView version (8622 Views)
Reply
Super Advisor
Yaboto
Posts: 453
Registered: ‎02-07-2007
Message 1 of 20 (8,622 Views)

Upgrading EVA4400 firmware & CommandView version

Hi,

 

Currently I have Command View version 9.01 and EVA controller firmware version 09534000. I want to upgrade them to the latest compatible versions possible.

Please advise.

 

Yaboto

Honored Contributor
Amar_Joshi
Posts: 514
Registered: ‎11-21-2006
Message 2 of 20 (8,617 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Hello Yaboto,

Latest firmware (XCS) for EVA4400 is 10100000 and avaialble at:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63147

 

To install this firmware you need to go to Command View v10.0 first. It's available at :

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10

 

If you need to find yourself next new releases, please go to http://software.hp.com and search for key words there.

 

Hope that helps.

 

 

Honored Contributor
Johan Guldmyr
Posts: 3,853
Registered: ‎06-14-2009
Message 3 of 20 (8,609 Views)

Re: Upgrading EVA4400 firmware & CommandView version

After you've downloaded the softwares you should read the HP P6000 EVA Updating Product Software Guide,

 

you can find it here

Trusted Contributor
SUBHAJIT KHANBARMAN_1
Posts: 222
Registered: ‎03-23-2011
Message 4 of 20 (8,585 Views)

Re: Upgrading EVA4400 firmware & CommandView version

I am surprised that you are running with CV EVA 9.01 along with XCS09534000 which is not supported. XCS0953x000 supports from CV EVA 9.1. Attached is the old Compatibility guide for your reference.

 

The upgrade path for CV EVA in your case,

 

9.0.1 -> 9.1

9.1 -> 9.2

9.2-> 10.0

 

In order to avoid all the above you need to uninstall CV EVA 9.0.1, reboot the server and go for the fresh installation of CV EVA 10 from the below link,

 

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10

 

XCS10100000 firmware download link,

 

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63147

 

XCS10100000 release notes download link,

 

http://h10032.www1.hp.com/ctg/Manual/c03284897.pdf

 

XCS10100000 firmware upgrade guide download link,

 

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02858292/c02858292.pdf

 

 

All other details related to XCS upgrade you can find in the following customer advisory,

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03287750&jumpid=em_alerts_us...

 

It is recommended that HP Command View 10.0 is used to manage the HP Enterprise Virtual Array with controller software XCS 10100000. So please find the following advisory which will help you to understand better,

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...

 

Please find the link to get latest Compatibility guide,

 

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02523047/c02523047.pdf

 

 

 

 

Frequent Advisor
Raymond E. Lilly
Posts: 43
Registered: ‎02-05-2002
Message 5 of 20 (8,580 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Does anyone know where to find the 9.1 -> 9.2 upgrade package?

Honored Contributor
Johan Guldmyr
Posts: 3,853
Registered: ‎06-14-2009
Message 6 of 20 (8,573 Views)

Re: Upgrading EVA4400 firmware & CommandView version

I believe you need to call hp to get it.
Trusted Contributor
SUBHAJIT KHANBARMAN_1
Posts: 222
Registered: ‎03-23-2011
Message 7 of 20 (8,564 Views)

Re: Upgrading EVA4400 firmware & CommandView version

I am not sure why you are looking for CV EVA 9.2.........I would suggest to go for the complete uninstallation of old CV EVA and go for the latest CV EVA10........because it is always good to run your EVA with latest XCS and to run with latest management software as well.

 

CV EVA 9.2 not available in public sites. You need to contact hp.

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 8 of 20 (8,560 Views)

Re: Upgrading EVA4400 firmware & CommandView version

The latest firmware XCS 10100000 works only with command view 10 or later, cv version 9.2 supports xcs up to version XCS 0953x000.

 

 

So you need

 

XCS 10100000

 

and

 

command view 10.

 

 

 

Uninstall the old CV version and install the new version.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
Domenic_Alvaro
Posts: 3
Registered: ‎05-06-2012
Message 9 of 20 (8,549 Views)

Re: Upgrading EVA4400 firmware & CommandView version

I want to upgrade from 09534000 to 10100000 with array-based management.  I can't find any information about which management controller firmware I need, or where to find it.

 

Management module firmware is currently mmp-0001.4000-CR05B2.  Do I need to update this?  If so, where do I get the latest version?

 

Thanks,

 

Domenic

Honored Contributor
Johan Guldmyr
Posts: 3,853
Registered: ‎06-14-2009
Message 10 of 20 (8,547 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Hi, 

 

management module firmware is included in the CV .iso. 

 

When you upgrade CV on the management module it should upgrade the mm firmware as well.

Occasional Visitor
Domenic_Alvaro
Posts: 3
Registered: ‎05-06-2012
Message 11 of 20 (8,545 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Wow! Thanks for the super-quick reply.
Occasional Visitor
kmouline
Posts: 1
Registered: ‎03-29-2013
Message 12 of 20 (6,806 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Hello Dears,

 

 

The firmware and CV upgrade can have an incidence on the production storage system ?

 

Thank you,

Occasional Advisor
Sapic
Posts: 7
Registered: ‎06-19-2013
Message 13 of 20 (5,970 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Hello all,

 

I am new for this EVA4400..

At my place currently Command View version is 8.0..

How can i upgrade CV to version 9??

I am already search for version 9, but cant find any..

Anyone can help me plz???

tq..

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 14 of 20 (5,966 Views)

Re: Upgrading EVA4400 firmware & CommandView version

current version 10.2:

 

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10.2


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor
Sapic
Posts: 7
Registered: ‎06-19-2013
Message 15 of 20 (5,952 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Thx 4 da replied..

But, actually im lookin 4 CV ver 9.. =(

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 16 of 20 (5,948 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Why version 9?

Version 9.4 is here:
(last version for 3000/5000):

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor
Sapic
Posts: 7
Registered: ‎06-19-2013
Message 17 of 20 (5,942 Views)

Re: Upgrading EVA4400 firmware & CommandView version

can ver8 upgrade straight away to ver10??

and is the link given compatible wit 4400??

torsten..

tq 4 u help sir..

i really appreciate..

 

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 18 of 20 (5,918 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Uninstall commandview, reboot, install the new version.

Current firmware XCS 11001100 needs command view 10.2.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Advisor
Sapic
Posts: 7
Registered: ‎06-19-2013
Message 19 of 20 (5,693 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Hye..

 

i successfully upgrade cv to 10.2

prob now is when i want to upgrade controller firmware to xcs11001100 it show base port changed..

why it happen???

Occasional Visitor
doOdzZZ
Posts: 1
Registered: ‎01-07-2013
Message 20 of 20 (2,116 Views)

Re: Upgrading EVA4400 firmware & CommandView version

Hello,

 

I upgraded the ABM module on my EVA4400 to CV10.3 and now when I am trying to upgrade the firmware to 11001100, when I reach the point where I click next after I browse for the SSS file, I get redirected to the page where it says that the base port has changed.

 

Thank you in advance.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.