StorageWorks 4/8 SAN Switch A7984A Old firmware (1602 Views)
Reply
Occasional Visitor
Posts: 2
Registered: ‎09-12-2011
Message 1 of 4 (1,602 Views)

StorageWorks 4/8 SAN Switch A7984A Old firmware

Good day.

I have StorageWorks 4/8 SAN Switch A7984A with 5.0.1 FW on board. For update FW even to v5.3.0d i need update to 5.1.x\5.2.x at firs. Where i can find FW v5.1\5.2 ?

 

Cannot upgrade directly to 5.3. Please upgrade to 5.1 or 5.2 first and then upgrade to 5.3.

 If i try update to v6.2.2e


ls: /fabos/cliexec/hashow: No such file or directory
Firmwaredownload failed. (0x29) The pre-install script failed.

 




Acclaimed Contributor
Posts: 23,520
Registered: ‎10-02-2001
Message 2 of 4 (1,591 Views)

Re: StorageWorks 4/8 SAN Switch A7984A Old firmware

All you need is here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...

 


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
Posts: 2
Registered: ‎09-12-2011
Message 3 of 4 (1,587 Views)

Re: StorageWorks 4/8 SAN Switch A7984A Old firmware

thx m8 !

Occasional Visitor
Posts: 2
Registered: ‎11-30-2011
Message 4 of 4 (1,468 Views)

Re: StorageWorks 4/8 SAN Switch A7984A Old firmware

Thanks...Were are the release notes?

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.