MSA2012i: Cant format with Windows Server 2003 (172 Views)
Reply
Occasional Visitor
ChristophGoth
Posts: 2
Registered: ‎04-23-2013
Message 1 of 5 (172 Views)

MSA2012i: Cant format with Windows Server 2003

I'v just got on a big problem:

 

These are two MSA, one MSA2012i and one 2312i.

Both mainly used to provide storage for the same XenServer Pool, working as expected.

 

One LUN on the 2012i should now be used on a hardware-installed Server 2003.

 

Problem:

I cant format the exported LUN, Diskmanagement takes some time and then gives me a screen saying the operation ran into a timeout.

 

What i have tried:

- Recreate Volume and Virtual Disk: Same Problem

- Change Volume Size from 2TB to 50GB: Same Problem

- Use another Server 2003: Same Problem

- Attach same LUN to Server 2008: Working, Format okay but can't use / attach Drive Letter after reattaching to 2003

- Attach LUN to XenServer: Working

- Attach Volume from MSA2312i: Same Problem...

 

MSA Drivers and iSCSI Initiator Versions are up2date.

 

I don't know how to get it solved, any ideas?

Acclaimed Contributor
Torsten.
Posts: 23,303
Registered: ‎10-02-2001
Message 2 of 5 (152 Views)

Re: MSA2012i: Cant format with Windows Server 2003

2 things to check:

 

- is the host profile set to windows?

- did you use quickformat instead of format?


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
ChristophGoth
Posts: 2
Registered: ‎04-23-2013
Message 3 of 5 (140 Views)

Re: MSA2012i: Cant format with Windows Server 2003

1:

Cant find any Host Profiles in MSA 2012i, where should i look?

 

2:

Tested both, qick and full format.

Acclaimed Contributor
Torsten.
Posts: 23,303
Registered: ‎10-02-2001
Message 4 of 5 (138 Views)

Re: MSA2012i: Cant format with Windows Server 2003

Sorry, no host profile for iSCSI, I looked into the FC model.

 

However, what firmware is running? Version J212P01?

 

Try to connect to CLI and run

 

> show versions


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Respected Contributor
Mark Matthews
Posts: 424
Registered: ‎08-09-2001
Message 5 of 5 (129 Views)

Re: MSA2012i: Cant format with Windows Server 2003

I had a similar problem with an FC SAN a few years ago with Windows 2003.

The solution turned out to be a re-install of SP2 for Windows 2003.

Thanks,

Mark...


---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.