Re: D2700 power supplies degraded ? (753 Views)
Reply
Frequent Advisor
kkpro
Posts: 85
Registered: ‎01-26-2012
Message 1 of 7 (860 Views)
Accepted Solution

D2700 power supplies degraded ?

Hello. New D2700 shows, that both power supplies are in "degraded" state. HP has a note, that this bug was resolved in 0146 fimware. Seems to be I have version 0147. And there are only 0146 versions of firmware on HP site. What to do ? downgrade ?

Acclaimed Contributor
Torsten.
Posts: 23,517
Registered: ‎10-02-2001
Message 2 of 7 (824 Views)

Re: D2700 power supplies degraded ?

[ Edited ]

As far as I remember there was a problem with the firmware load utility, for this reason version 0147 is not available.
IIRC this version is still used in other environments (MSA, EVA).

Don't downgrade.

The question is, what is "degraded"?

 

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/advisoriesDisplay/?sp4ts.oid=395...

 

 

This was the fix:

 

The following items was fixed in firmware 0147
• Fixed an issue found during manufacturing testing where, after hot plugging an I/O module, the
enclosure fan speed did not return to the dual I/O module configuration fan speed.


The following items were added or fixed in firmware 0146:
• Fixed a reporting issue in which a power supply was incorrectly reported as failed by some
management utilities.
• Added speed negotiation to allow 6 Gb/s SATA drives to function at 3 Gb/s.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
tbarnespainmdco
Posts: 1
Registered: ‎12-31-2013
Message 3 of 7 (783 Views)

Re: D2700 power supplies degraded ?

Have same issue.  So just to verify.  Solution is to leave as is?  put up with the degraded status?

Visitor
Lagerstars
Posts: 2
Registered: ‎01-24-2013
Message 4 of 7 (756 Views)

Re: D2700 power supplies degraded ?

Same problem on a newly delivered unit here too. Also running 0147 firmware.

Frequent Advisor
kkpro
Posts: 85
Registered: ‎01-26-2012
Message 5 of 7 (753 Views)

Re: D2700 power supplies degraded ?

I opened a case at HP and the answer was "wait for new firmware" :(

Frequent Advisor
kkpro
Posts: 85
Registered: ‎01-26-2012
Message 6 of 7 (650 Views)

Re: D2700 power supplies degraded ?

Seems to be new firmware is available now for D2600/D2700: 0149 (B) (2 Apr 2014). Anyone already tried it ?

Frequent Advisor
kkpro
Posts: 85
Registered: ‎01-26-2012
Message 7 of 7 (634 Views)

Re: D2700 power supplies degraded ?

Well, updated p2000 with latest firmware and then D2700... Now seems to be OK.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.