Connecting a windows server 2003 host to hp p2000 storage (210 Views)
Reply
Occasional Contributor
sitelogin20
Posts: 3
Registered: ‎01-21-2014
Message 1 of 2 (210 Views)

Connecting a windows server 2003 host to hp p2000 storage

Hi

I have a hp p2000 san. and a system with windows server 2003 sp2 with a AJ763B Qlogic HBA.

After phisically installing HBA , connecting HBA to storage using Fiber optic cable and adding host according to HBA WWN in storage console ,I've tried to installing HBA Driver on windows server 2003 sp2 to see a dedicated SAN volume.

At first I have many problems in installing HBA Drivers but after some attempts I do it, but After installing HBA I saw 4 new devices with yello question mark in a device manager with "HP P2000 G3 FC SCSI Enclosure Device" I search manytimes in google to find driver for them but I couldn't find any. Know I can see the SAN volume but I can't use MPIO software to manage multipathing it dosen't matter which command I issue everytime I see "command Failed" result and I think these uninstalled device drivers are guilty.  

Can anybody help me to install these device drivers with a link to download them or with any other course of action?

Thanks in advanced.

Valued Contributor
Cali
Posts: 81
Registered: ‎04-12-2011
Message 2 of 2 (180 Views)

Re: Connecting a windows server 2003 host to hp p2000 storage

[ Edited ]

Did you Install the "HP HBA Driver" or Windows or Qlogic...?

Microsoft Windows Server 2003

 

As I renember the Storage Device descripter .inf came with the HP HBA Driver.

 

If you have Installed HP Driver reboot and then look here:

"HP StorageWorks MSA System MPIO DSM Installation Guide (590337-005, September 2010)" Page 9

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.