HP SHR 9.30 installation issue (6918 Views)
Reply
Occasional Advisor
Morven
Posts: 11
Registered: ‎07-20-2011
Message 1 of 15 (6,918 Views)

HP SHR 9.30 installation issue

[ Edited ]

Hi,

 

I am doling the installation of HP SHR9.30 ( Windows)  in my environment.

My test enviornment is as below:-

 

Windows 2008 R2 64 Bit Standard SP1,8 GB RAM, 300 GB Space. 16 GB Swapped Memory.

 

I am again & again getting below error

 

 

"There was a failure with this installation action for package HPPmdbBORebrand 9.30.000 (HP PMDB BO rebrand). Installing SAP BusinessObjects... Please wait.. has returned a non-zero error code. HP Service Health Reporter will not be installed.  To rollback this installation and remove all the installed packages, click Rollback. To cancel the installation and leave all the packages"

 

Please find the attached screnn shot,reply ASAP.

 

 

Regards,

Syed

Honored Contributor
m_vidyasagar
Posts: 636
Registered: ‎04-21-2011
Message 2 of 15 (6,892 Views)

Re: HP SHR 9.30 installation issue

[ Edited ]

As per below KB , the issue occurs due to 2 reasons

 

(a) Either any of the downloaded part is corrupt..

 

(b) Merging the parts is not done properly..

 

http://support.openview.hp.com/selfsolve/document/KM00395290

- Vidyasagar Machani -

Tell me and I forget. Teach me and I remember. Involve me and I learn. -- Benjamin Franklin
Occasional Advisor
Morven
Posts: 11
Registered: ‎07-20-2011
Message 3 of 15 (6,854 Views)

Re: HP SHR 9.30 installation issue

I tried both methods of reassembly but result remains same

 

copy /b TD185-150*.part? C:\HPSHR_9.3\HPSHR930.iso
OR
type TD185-150*.part? > C:\HPSHR_9.3\HPSHR930.iso

Honored Contributor
m_vidyasagar
Posts: 636
Registered: ‎04-21-2011
Message 4 of 15 (6,851 Views)

Re: HP SHR 9.30 installation issue

Download the new installation parts and then re-try the installation ..

- Vidyasagar Machani -

Tell me and I forget. Teach me and I remember. Involve me and I learn. -- Benjamin Franklin
Occasional Advisor
Morven
Posts: 11
Registered: ‎07-20-2011
Message 5 of 15 (6,849 Views)

Re: HP SHR 9.30 installation issue

redownloaded & tried . But same error .

Honored Contributor
m_vidyasagar
Posts: 636
Registered: ‎04-21-2011
Message 6 of 15 (6,846 Views)

Re: HP SHR 9.30 installation issue

Just give a try :

 

Un-install the partially installed software , clear the temp files , delete the registry entries .. Reboot your machine and then try the installation ..

- Vidyasagar Machani -

Tell me and I forget. Teach me and I remember. Involve me and I learn. -- Benjamin Franklin
Frequent Advisor
sunilts
Posts: 64
Registered: ‎02-29-2012
Message 7 of 15 (6,817 Views)

Re: HP SHR 9.30 installation issue

Hello Morven,

 

Please Ensure that you have local admin user rights. You must not be logged into the system as a domain user for the installtion.

 

 

Thanks,

 

Sunil

Occasional Advisor
Morven
Posts: 11
Registered: ‎07-20-2011
Message 8 of 15 (6,810 Views)

Re: HP SHR 9.30 installation issue

Hi Sunil,

 

I am installing as Local Admin. But the error remains same.

Valued Contributor
pafreire
Posts: 140
Registered: ‎01-10-2011
Message 9 of 15 (6,788 Views)

Re: HP SHR 9.30 installation issue

Hello Morven,

 

Please verify if UAC is disabled and try to execute the installation with a right click in the installation file to show popup menu and clicking in "Run as administrator" option.

 

Let we know the outcomes.

 

 

BR,

 

Paulo

 

“The greatest challenge to any thinker is stating the problem in a way that will allow a solution.”
Bertrand Russell
Regular Advisor
Vishnu Babu V
Posts: 82
Registered: ‎09-23-2010
Message 10 of 15 (6,780 Views)

Re: HP SHR 9.30 installation issue

Hi Morven,

 

 

Try reinstalling the software again and make sure that you Check "force repair packages" checkbox while reinstalling..

 

-- 

--
-Vishnu.
Frequent Advisor
sunilts
Posts: 64
Registered: ‎02-29-2012
Message 11 of 15 (6,422 Views)

Re: HP SHR 9.30 installation issue

Dear Morven.?

 

Try to increase the RAM to 12 GB and  24 Gb and try it. The SAP business object installation takes more time to install. When ever the memory crunch takes please installation fails.

 

or if ur installing the interactive drives i.e. in other drives except C drive check the user which ur using is having read and write and read and execute permission is set.

 

Please check these things and try the installation.

 

Thanks,

 

Sunil

Valued Contributor
gope
Posts: 51
Registered: ‎09-05-2005
Message 12 of 15 (6,414 Views)

Re: HP SHR 9.30 installation issue

Hello Morven,
Before you re-install the application, ensure Read/Write permission is given to Users Group to the drive where SHR is installed.
postgres user is created during SHR installation and belongs to Users group.
Best Regards,
Gopinath Manickam

To show your appreciation, click KUDOS !!!
Occasional Advisor
Morven
Posts: 11
Registered: ‎07-20-2011
Message 13 of 15 (6,206 Views)

Re: HP SHR 9.30 installation issue

Thanks for your valuable inputs, i will try & get back.

Occasional Contributor
RaviKumar
Posts: 4
Registered: ‎11-10-2010
Message 14 of 15 (4,101 Views)

Re: HP SHR 9.30 installation issue

Hi,

 

Were you able to resolve the issue and can you post the fix that you have applied to resolve this.

 

regards

Ravi Kumar

Occasional Visitor
LijinRaj
Posts: 1
Registered: ‎04-02-2014
Message 15 of 15 (1,073 Views)

Re: HP SHR 9.30 installation issue

Check if all the registry keys inside HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows>CurrentVersion>Installer>UserData has permissions for the current user.

 

We had a similar issue in our environment, and the issue was resolved by manually assigning permissions to the keys under HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows>CurrentVersion>Installer>UserData for the current user.

 

That resolved the issue for us.

 

 

Best Regards,

Lijin Raj

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.