HP storage blade D2200sb boot question.

by Community Manager on ‎03-07-2012 01:22 PM

Question

I have host blade connected with storage blade D2200sb (e.g.: bay1 and bay2),

When I’m trying to install Linux OS on the host blade, I found that when OS scan the bus, the storage blade get to be mapped first and only then the local drives on the host,

 

e.g.:

Storage blade has 4 drives in Raid1/0 – (2TB)

Local drives are in Riad1 – (146GB)

 

 

When we using our automatic OS installation, this is probably the reason why the OS installed by default on the storage blade rather than the local drives (which we desire to install on local drives rather than on storage blade)

 

My question: Is there a way to set the bus scan of the OS (maybe via BIOS settings) in a way that the local hard drives will get to be the first to be scanned?

(So local drives will get /cciss/c0d0

Answer

They should be able to set the internal Embedded array to boot first by changing the Boot Controller order in the ROMBIOS.

 

It would look something like this:

 

webpic70.png

 

webpic71.png

 

******************

 

I hope that helps. Any other comments or suggestions for Irit?

 

Search
Showing results for 
Search instead for 
Do you mean 
Contributors
HP Blog

Reality Check: Server Insights

Featured


Follow Us
Twitter Stream
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.