10-10-2013 11:59 PM
I'm not sure anyone of you did the integration with HPIO and HP Server Automation.
I have some issue here.
Currently the setup of my HP Server Automation is running on Enterprise version. I use OS Build Plan to do the integration with HPIO. All my OS Build Plan able to view in the HPIO.
But now when I try to provision a image, I have some problem. According to the log,
@!@,2013-10-10 18:13:00 SGT,ERROR,Register Managed Node Component,TargetNodesHandler.registerManagedNodeFo
@!@,2013-10-10 18:13:00 SGT,INFO,Register Managed Node Component,CoreApiImpl.registerManagedNodeForDS(),,
The user that I used to do the integration is a user that have all th permission. But yet seems like give the permission error.
Anyone can advise?
Many thanks in advance
Solved! Go to Solution.
10-14-2013 06:51 AM
Hi Jun Hao
Are you confident that HPSA provisioning setup was made in the SA core?
Please login to the SA core and run this:
Paste the output you get, it will show if there was any DHCP setup at all in the core.
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
01-20-2014 06:37 PM
Would you mind sharing the details of your solution please. Running into the same errors in our system.
"configuration of the permission" - where are the permissions configured and what permissions where needed.
02-20-2014 10:42 PM
You need to logon to the HP SA web page and check the permission of the user that you used to perform the integration with CMS.
Kindly give Administrator rights to test it out