08-01-2008 04:29 AM
I have a hpux11.23 with ISEE installed.
Becouse some network configuration changes, I have no longer direct access to isee.europe.hp.com.
Instead, I have to use a HTTP proxy in 192.168.x.x network.
Where should I configure ISEE (or whole system) to use HTTP PROXY?
thanks in advance, Julian
08-01-2008 04:41 AM
2. You can open ISEE page and under system, in the last i hope there was a option. (I am not on system, so cant provide port number)
08-01-2008 04:42 AM
08-01-2008 04:50 AM
However, This is not the solution.
When I connect with http://server:5060, I have HTTP 200 OK answer after few seconds delay, but the served site is empty.
010808 14:44:53.554 ERROR,[Comm] Comm::send /opt/hpservices/mqueue/OQ371a_CONN_HP_Services.mot failed
010808 14:44:53.563 ERROR,[Comm] sendReceive FAILED
010808 14:44:53.563 ERROR,[Comm] NetworkException (1): socket.cpp:116 (238) Connection timed out Socket::connect(): socket() failed: isee.europe.hp.com (220.127.116.11)
one more test:
date; telnet 192.168.x.y 5060 ; date
Fri Aug 1 14:43:27 MESZ 2008
Connected to 192.168.x.y.
Escape character is '^]'.
Connection closed by foreign host.
Fri Aug 1 14:43:32 MESZ 2008
08-01-2008 04:52 AM
08-01-2008 05:02 AM