Webes - wccproxy installation failed (1226 Views)
Reply
Super Advisor
inex
Posts: 282
Registered: ‎05-24-2005
Message 1 of 10 (1,226 Views)
Accepted Solution

Webes - wccproxy installation failed

Hi,

I have an appliance server (DL380 G5) with windows 2003 sp2 and have installed msjava, installed and configured ISEE through proxy server. When I try to install Webes 5.1 (from 3 jan 08)I manage to fill out all information during installation, but at the end it comes up with the following error
wccproxy installation failed to complete successfully. Do you want to retry installing wccproxy?

When I answer yes it goes through the same procedure and ends up with the same error message. I have used the same procedure and the same sw versions at other customers and tha thas worked.

Suggestions are appriciated.

Regards

-inex
Honored Contributor
Rob Leadbeater
Posts: 3,582
Registered: ‎08-14-2002
Message 2 of 10 (1,226 Views)

Re: Webes - wccproxy installation failed

Hi inex,

Do you happen to have a software firewall running on the appliance server ?

I haven't used WEBES much on Windows, however when I did try to install it recently, I had lots of problems on a machine that had the McAfee Desktop firewall installed...

Hope this helps,

Regards,

Rob
Super Advisor
inex
Posts: 282
Registered: ‎05-24-2005
Message 3 of 10 (1,226 Views)

Re: Webes - wccproxy installation failed

I will have a look and see what the customer has installed. Thanks for your help.

-inex
Trusted Contributor
ITRC Test-CH
Posts: 146
Registered: ‎07-20-2003
Message 4 of 10 (1,226 Views)

Re: Webes - wccproxy installation failed

Hi inex,

Try to install first WCCproxy, then install WEBES. WEBES recognizes an already running WCCproxy.

Regards,
Werner
Super Advisor
inex
Posts: 282
Registered: ‎05-24-2005
Message 5 of 10 (1,226 Views)

Re: Webes - wccproxy installation failed

Thanks for your help

-inex
Super Advisor
inex
Posts: 282
Registered: ‎05-24-2005
Message 6 of 10 (1,226 Views)

Re: Webes - wccproxy installation failed

As far as I see the wccproxy is part of the webes package. Can I download wccproxy seperatly?

-inex
Advisor
PabloC
Posts: 11
Registered: ‎07-03-2008
Message 7 of 10 (1,226 Views)

Re: Webes - wccproxy installation failed

You can download the ELMC (which is basycally WCCProxy)
If you start downloading WEBES from the HP site at some point it will give you the option to download WEBES or ELMC.

As for you're original question/problem, go ahead and try it while logged in as CONSOLE, if you're using Remote Desktop you need to right click on the icon, go to properties and add this to the target: " /console" (notice the space before /)
Super Advisor
inex
Posts: 282
Registered: ‎05-24-2005
Message 8 of 10 (1,226 Views)

Re: Webes - wccproxy installation failed

Thanks a lot.

-inex

Honored Contributor
Rob Leadbeater
Posts: 3,582
Registered: ‎08-14-2002
Message 9 of 10 (1,226 Views)

Re: Webes - wccproxy installation failed

Hi again,

Just in case you didn't get this working, you might want to check your antivirus settings.

I've just gone through my logs, and discovered that AVG AV software picked up parts of WEBES and WCCProxy as being "Potentially harmful" due to the presence of the program "PsKill"

Cheers,

Rob
Super Advisor
inex
Posts: 282
Registered: ‎05-24-2005
Message 10 of 10 (1,226 Views)

Re: Webes - wccproxy installation failed

Hi,

did not have chance to try it again - because customer went on holiday. Will try in 3 weeks time. Thanks for your input.

-inex
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.