EMS configuration (294 Views)
Reply
Frequent Advisor
Puneet Singh tandon
Posts: 90
Registered: ‎05-14-2006
Message 1 of 2 (294 Views)

EMS configuration

Please help me in providing steps to configure EMS to send emails whenever an EMS incident occours.
Honored Contributor
Liem Nguyen
Posts: 306
Registered: ‎02-11-2003
Message 2 of 2 (294 Views)

Re: EMS configuration

Hi,

By dafault, EMS sends email to root when a MAJOR WARNING or SERIUOS error is detected.

You can check this by running /etc/opt/resmon/lbin/monconfig, option M:

3) Send events generated by monitors
/StorageAreaNetwork/events/SAN_Monitor
/storage/events/disk_arrays/AutoRAID
/storage/events/disks/default
/adapters/events/FC_adapter
/adapters/events/TL_adapter
/system/events/chassis
/system/events/core_hw
/connectivity/events/hubs/FC_hub
/connectivity/events/multiplexors/FC_SCSI_mux
/connectivity/events/switches/FC_switch
/adapters/events/iscsi_adapter
/system/events/memory
/adapters/events/ql_adapter
/adapters/events/raid_adapter
/storage/events/enclosures/ses_enclosure
/storage/events/tapes/SCSI_tape
/system/events/ups
/storage/events/disk_arrays/FC60
/system/events/ipmi_fpl
/storage/events/disk_arrays/FW_SCSI
/system/events/ia64_corehw
/system/events/cpu/lpmc
/storage/events/disk_arrays/MSA1000
/adapters/events/scsi123_em
/system/events/system_status
with severity >= MAJOR WARNING to EMAIL root
4) Send events generated by monitors
/adapters/events/raid_adapter
with severity >= SERIOUS to EMAIL root
with comment:


Hope this helps,
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.