07-03-2013 10:01 PM
My server HP ML110G7 now has raid 1+0 (1TB x 2).
Now i just want to add (3TB x 2) for storage only..
When i try to use the F8 in bios, it only allows me to create a logical drive of only 800GB..What could be the problem?
The ACU in windows will detect it as 0TB.
Could updating the driver solve it?
Im using windows server 2012 foundation.
07-30-2013 10:50 AM
Sorry, the B110i only supports 2 TiB (2.2 TB) drives, the maximum that is supported by 32-bit LBAs (logical block addresses).
If software tries to store the value of 3 TB in a 32-bit variable, which supports a maximum LBA of 2.2 TB, then it will interpret the value as 800 GB ( 3 TB - 2.2 TB = 800 GB) like you are seeing.
Although newer controllers support drives larger than 2 TiB by supporting 64-bit LBA addressing, you still have to be careful with boot drives. On BIOS-based systems, Windows only supports booting from < 2 TiB drives; it only supports > 2 TiB boot drives on UEFI-based systems. Linux, on the other hand, is capable of booting from larger drives on BIOS-based systems when using the grub2 or syslinux bootloaders. To boot Windows with one of the newer controllers, you should ensure the logical drive used for booting is < 2 TiB.