Smart Array P400 (HDD Drive upgrade) (381 Views)
Reply
Occasional Contributor
denniswier
Posts: 1
Registered: ‎08-10-2013
Message 1 of 2 (381 Views)

Smart Array P400 (HDD Drive upgrade)

[ Edited ]

Ive had the question of 'upgrading/replcement' options of an array, preff without having to fair RAID fallout.

 

im planning to replace these 800's on SMART error notice with 1tb's from SeaGate.

but can i do this without having to struggle much about errors, no posts ect ect.

 

AND ive also the weird error in the '3rd' raid array that the 5th disc is dying so thats why im asking this.

the drive gives this error not frequently, and only from time to time when booting the system, that has been running now for 4 years.

 

the server, and the P400 have the latest firmware installed.

 

I run the following config:

 

HP DL185G5, thus 12drive's

 

  1. 2x WD Raptor, 300gb RAID1
  2. 1x WD Green, 800gb JBOD
  3. 3x WD Green, 800gb RAID5
  4. 3x WD Green, 800gb RAID5
  5. 3x WD Green, 800gb RAIID5

if you need more info, plz let me know, and i provide :manhappy:

Regular Advisor
David_Tocker
Posts: 100
Registered: ‎05-14-2012
Message 2 of 2 (339 Views)

Re: Smart Array P400 (HDD Drive upgrade)

Dude, at the least get some raid type drives (WD raid edition or Seagate constellation) you are a fool to put green drives in an array with any raid controller. Replace them one at a time and wait for the rebuild to complete before replacing the next one. Do some research and you will realize that I am not being insulting in the slightest, it really is very silly to use non raid specified drives in an array. Good luck :)

Regards.

David Tocker
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.