Re: Proliant DL380G4 with MSA30 - adding MSA60? (553 Views)
Reply
Occasional Advisor
Tauchen
Posts: 10
Registered: ‎11-22-2009
Message 1 of 6 (553 Views)
Accepted Solution

Proliant DL380G4 with MSA30 - adding MSA60?

I currently have DL380G4 with MSA30. I wanted to add MSA60 with 12 SAS (450GB) drives. My vendor sent me P800 controller, but I just realized that P800 is a PCI-E controller and i only have PCI-X slots.. WHAT TO DO?

1) is there a different riser that has one PCI-X and one PCI-E slot?

2) is there another PCI-X controller that would work with MSA30? I only found a riser card that has two PCI-X slots, so no way to use the old PCI-E controller with MSA30.

3) return p800 and get p600 with a cable that will connect MSA60. Will this even work? Does p600 support logical partition larger than 2TB like p800 does?
Occasional Advisor
Tauchen
Posts: 10
Registered: ‎11-22-2009
Message 2 of 6 (553 Views)

Re: Proliant DL380G4 with MSA30 - adding MSA60?

sorry, on question 2, I meant, is there any PCI-Express controllers compatable with MSA30.. if I change the riser from PCI-X to PCI-E, I will need to figure out how to get MSA30 connected back to the server, since th eoriginal controller is PCI-X and I won't be able to use it after I change the riser to accomodate the new P800.
Honored Contributor
Víctor Cespón
Posts: 2,397
Registered: ‎11-09-2007
Message 3 of 6 (553 Views)

Re: Proliant DL380G4 with MSA30 - adding MSA60?

You need to look at the Quickspecs of all the components:

DL380 G4:
http://h18000.www1.hp.com/products/quickspecs/12028_div/12028_div.html

Yes, there's an optional PCI-E riser with two slots.

MSA60:
http://h18000.www1.hp.com/products/quickspecs/12627_div/12627_div.html

Most compatible controllers are PCI-E, but it is compatible with SmartArray P600 too.

SmartArray P600 quickspecs:
http://h18000.www1.hp.com/products/quickspecs/12247_div/12247_div.html

MSA60 listed as compatible

MSA30 Quickspecs:
http://h18000.www1.hp.com/products/quickspecs/11738_div/11738_div.html

So the cheapest option is to return the P800 and ask for the correct controller for your case, the P600.
Occasional Advisor
Tauchen
Posts: 10
Registered: ‎11-22-2009
Message 4 of 6 (553 Views)

Re: Proliant DL380G4 with MSA30 - adding MSA60?

just ordered a riser cage 354675-B21. hopefully this will work.
Occasional Visitor
Brent Browning
Posts: 1
Registered: ‎01-27-2010
Message 5 of 6 (553 Views)

Re: Proliant DL380G4 with MSA30 - adding MSA60?

Vadim - I have the same setup and trying to attach an MSA60 to my DL380 G4. Were you able to make this work with the new PCI-Express riser cage and the P800? Trying to solve this as well and hoping to learn from your experience. thanks!
Occasional Advisor
Tauchen
Posts: 10
Registered: ‎11-22-2009
Message 6 of 6 (553 Views)

Re: Proliant DL380G4 with MSA30 - adding MSA60?

yes, the riser card fixed the problem.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.