01-22-2014 06:38 AM - edited 01-22-2014 06:45 AM
It would be helpful to know the server model.
However, if "hot swap controller" means you can hot swap disks: yes, you can do.
In case of RAID 1 and 5 the controller will automatically rebuild, a RAID 0 is lost.
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! star in the left column!
01-23-2014 03:46 AM
The server model is HP Pro-Liant ML370G5.
Raid 1 is configured.
So I have just to remove broken hard disk and insert the new one when the server is on and everything in the existing hard disk will be copied on the new one. Is it correct?
02-24-2014 01:58 AM
The ML370 G5 have a Hot-Plug Drive Carrier.
With the P400 Controller you can replace the Failed Disk Online.
Usally the Hot-Plug Drive Carrier have a Red Release Button.
You see the Reconstructing Process by the Blinking Green Drive LED.
It is going solid if Reconstuct is finished.