Xeon E3-1220LV2 upgrade on G1610T Gen 8 Microserver (781 Views)
Reply
Occasional Visitor
buchhla
Posts: 2
Registered: ‎07-09-2013
Message 1 of 3 (781 Views)

Xeon E3-1220LV2 upgrade on G1610T Gen 8 Microserver

[ Edited ]

Hi, I am trying to see if the new G8 microservers have any CPU whitelisting in the BIOS.  I am hoping to pick one of these up and upgrade the CPU to a E3-1220LV2.  So my question is two-fold.  First, will this work?  I am not concerned about the configuration being officially supported.  If not, would a 35 Watt Xeon E3 with a GPU work?  I am not sure if on this motherboard the CPU is required to have an integrated GPU on die or not with the Matrox controller.

 

 

p.S. this thread has been moevd from ProLiant Servers (ML,DL,SL) to ProLiant Servers - Netservers. - Hp forum moderator

Please use plain text.
Occasional Visitor
mhitt
Posts: 1
Registered: ‎09-20-2013
Message 2 of 3 (622 Views)

Re: Xeon E3-1220LV2 upgrade on G1610T Gen 8 Microserver

As far as I know it will work, but there may be a BIOS issue with adding a chip with gpu as the graphics are run through the matrox chip on the iLO.  Check this blog out, this guy is my hero: http://b3n.org/installed-xeon-e3-1230v2-in-gen8-hp-microserver/

Please use plain text.
Occasional Visitor
buchhla
Posts: 2
Registered: ‎07-09-2013
Message 3 of 3 (599 Views)

Re: Xeon E3-1220LV2 upgrade on G1610T Gen 8 Microserver

Sweet, thanks for the link. I actually would prefer to use a non-GPU version of the chip to save a few watts
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation