HP ML150G6 - 510-BMC Sel is Full

by Community Manager on ‎09-27-2012 07:33 AM


When starting my server I receive this message

BMC Responding
510-BMC Sel is Full

Then I accessed the BIOS but I didn't found the way to clear the BMC log.

How can I clear the log?


1. Boot the server and press the F10 key when prompted to run BIOS Setup.
2. Select the "Advanced" menu.
3. Scroll down to "IPMI" and press the ENTER key
4. Scroll down to the System Event Log and press the ENTER key.
5. At the "Clear System Event Log" selection, press the ENTER key to toggle between "Enable" and "Disable."
6. Select "Enable."
7. Press the F10 key to Save the changes and exit the BIOS Setup

Showing results for 
Search instead for 
Do you mean 
HP Blog

Reality Check: Server Insights


Follow Us
Twitter Stream
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.