Re: raid 5 ready for recovery (317 Views)
Reply
Occasional Contributor
polius
Posts: 3
Registered: ‎11-18-2013
Message 1 of 3 (419 Views)

raid 5 ready for recovery

[ Edited ]

I have 4 discs on raid 5 ( 3 + 1 spare ) on ml350

Hard disc on slot 0 , seems to be failed so i replaced it with another one. Restarted the server , pressed f1 etc. I also changed the priority of rebuilding to high

I have attached 2 photos from hp acu

To my knowledge,my next step should be : replace again the disc on slot 0 with an other one and the spare should automatically rebuild the new drive. Is that correct?

 

Regards

 

p.s. at the moment the server is really slow ( delegated mode? ) so unfortunatelly i cant get any back up at all ( it says 4-5 days just for 60 gb )

 

 

P.S. This thread has been moved from Disk Array to ProLiant Servers (ML,DL,SL). -HP Forum Moderator

Regular Advisor
Sbrown
Posts: 135
Registered: ‎06-25-2013
Message 2 of 3 (330 Views)

Re: raid 5 ready for recovery

This is why you use raid-10 , it is that much faster during the restore process and usable!

Same rebuild with raid-10 would take a day tops for 2tb drive on a busy server without any impact to performance!
Occasional Contributor
polius
Posts: 3
Registered: ‎11-18-2013
Message 3 of 3 (317 Views)

Re: raid 5 ready for recovery

the thing is that rebuild is stuck at 0% for days ( waiting to rebuild )

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.