raid 5 ready for recovery (328 Views)
Reply
Occasional Contributor
polius
Posts: 3
Registered: ‎11-18-2013
Message 1 of 3 (328 Views)

raid 5 ready for recovery

[ Edited ]

I have 4 discs on raid 5 ( 3 + 1 spare ) on ml350

Hard disc on slot 0 , seems to be failed so i replaced it with another one. Restarted the server , pressed f1 etc. I also changed the priority of rebuilding to high

I have attached 2 photos from hp acu

To my knowledge,my next step should be : replace again the disc on slot 0 with an other one and the spare should automatically rebuild the new drive. Is that correct?

 

Regards

 

p.s. at the moment the server is really slow ( delegated mode? ) so unfortunatelly i cant get any back up at all ( it says 4-5 days just for 60 gb )

 

 

P.S. This thread has been moved from Disk Array to ProLiant Servers (ML,DL,SL). -HP Forum Moderator

Please use plain text.
Regular Advisor
Sbrown
Posts: 120
Registered: ‎06-25-2013
Message 2 of 3 (239 Views)

Re: raid 5 ready for recovery

This is why you use raid-10 , it is that much faster during the restore process and usable!

Same rebuild with raid-10 would take a day tops for 2tb drive on a busy server without any impact to performance!
Please use plain text.
Occasional Contributor
polius
Posts: 3
Registered: ‎11-18-2013
Message 3 of 3 (226 Views)

Re: raid 5 ready for recovery

the thing is that rebuild is stuck at 0% for days ( waiting to rebuild )

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation