What is required to upgrade to P410 Raid Controller on HP ML350 G5? (464 Views)
Reply
Occasional Contributor
DJHess
Posts: 8
Registered: ‎06-18-2012
Message 1 of 3 (464 Views)

What is required to upgrade to P410 Raid Controller on HP ML350 G5?

Hi,

Have ML350 G5 and want to maximize performance for a set of 1TB SATA drives and so I am thinking we could move from internal P200 Raid Controller to a P410 w/512MB BBWC.  What is involved here?  It appears that the P410 has an entirely different connector on it for attaching the drive cable so the cables used with the P200 will not work.  What cables do I need to go from the P410 to the ML350's LFF drive cage? Thanks.

 

 

HP Pro
Vijayasarathy
Posts: 270
Registered: ‎01-10-2012
Message 2 of 3 (456 Views)

Re: What is required to upgrade to P410 Raid Controller on HP ML350 G5?

 

 

You may try either AG452A to connect the hard drive cage to the controller:

 

http://partsurfer.hp.com/Search.aspx?SearchText=AG452A

 

Verify the connectors before buying.

 

Regards,

 

Vijayasarathy

I am an HP employee.


To say thanks click the "thumbs up" icon below!!!
Honored Contributor
PGTRI
Posts: 495
Registered: ‎01-19-2012
Message 3 of 3 (454 Views)

Re: What is required to upgrade to P410 Raid Controller on HP ML350 G5?

hi,

 

Please check the quickspecs of the server.

 

http://h18004.www1.hp.com/products/quickspecs/12475_div/12475_div.html

 

The P410 controller is not listed there. That means, it's not supported for this server.

 

My suggestion is to use P400 and not P410.

 

regards,

How to Say Thank You? Just click the KUDOS Star!
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.