12-08-2013 12:26 PM - last edited on 12-08-2013 11:40 PM by Maiko-I
We're putting in our first ProLiant server on to a small site next week. The client wants to see a demonstration of how RAID 1 redundancy would work in the case of a hard disk failure. I was thinking of just pulling the disk out of the front drive bay as the server is running (to simulate a disk failure). Then when the client is satisfied with my visual demonstration, I would just put the drive back in to the drive bay and let it rejoin the RAID.
Is there any reason why this would be a bad idea? I mean, is it okay just to pull the disk out and then put it back?
P.S. This thread has been moved from Servers > General to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator
12-13-2013 10:15 AM
By your message, I'm guessing that the server is being moved to a new location. After booting up, check the ACU or ADU to verify disks are ok and no errors. Then pull out a disk, verify server is still fully up without problems (for your customer's benifit), then re insert disk. disk will be rebuilt from scratch.