SPP Feb 2013 release, HPSUM Fatal Error (1069 Views)
Reply
Valued Contributor
BradV
Posts: 98
Registered: ‎12-23-2010
Message 1 of 6 (1,069 Views)

SPP Feb 2013 release, HPSUM Fatal Error

I've been using the Feb 2013 release of SPP on many DL380 G7s, BL460c G6 & G7 with no problem.  However, on two DL380 G5s, it fails immediately with:

 

Fatal Error: Repository Manager has exited unexpectedly.  HP SUM will not quit.

 

Has anyone else seen this.  If so, any resolution?

 

Thanks!

Occasional Visitor
ManuelHerdez
Posts: 1
Registered: ‎10-04-2013
Message 2 of 6 (657 Views)

Re: SPP Feb 2013 release, HPSUM Fatal Error

Configure almost 1 nic with ip and mask, then try again. this solved the problem.

sorry my english

Valued Contributor
BradV
Posts: 98
Registered: ‎12-23-2010
Message 3 of 6 (604 Views)

Re: SPP Feb 2013 release, HPSUM Fatal Error

No, I do have a NIC configured.  That is how I transferred the SPP to the server.  :)

 

I'm not sure what it is.  I opened a case with HP, but that never got anywhere.  I guess I'll just have to wait for the next release and see if they've solved the problem.  I'd like at least a better error message, some logging or something.  :(

Acclaimed Contributor
Torsten.
Posts: 23,303
Registered: ‎10-02-2001
Message 4 of 6 (601 Views)

Re: SPP Feb 2013 release, HPSUM Fatal Error

SPP 2013.09 and HPSUM 6.0 is available.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Valued Contributor
BradV
Posts: 98
Registered: ‎12-23-2010
Message 5 of 6 (599 Views)

Re: SPP Feb 2013 release, HPSUM Fatal Error

I'll download it and give it a try.  It's hard to tell when a new version is out since they don't put a release date on it.  :(

 

Thanks!

Acclaimed Contributor
Torsten.
Posts: 23,303
Registered: ‎10-02-2001
Message 6 of 6 (596 Views)

Re: SPP Feb 2013 release, HPSUM Fatal Error

You can always see the current version here

http://h18004.www1.hp.com/products/servers/service_packs/en/index.html


and the date is part of the name ;-))

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.