12-03-2010 02:16 AM
Then bought the BBWC upgrade but someone used the wrong code so I got only the battery.
So I ordered the cable only, that would connect my 256 MB module to the battery. I had surfed the HP documentation and found the pn 417836-B21 being the required cable.
The cable arrived and has the WRONG CONNECTOR (see the attached picture, if it gets posted). The box has the 417836-B21 number on it, but the cable is marked pn 408658-002 spare 409125-001. The box makes no mention to these latter two codes.
I have browsed through the P400/P410 documentation again and drawings show memory modules with either connectors, but spare parts lists do not mention (anymore?) the cable PN.
My questions: did I order the right cable but got the wrong one? What would be the right PN to connect the 256 MB to the battery?
12-06-2010 06:44 AM
Smart Array P400 Controller battery cable assembly, 11.5 inch4 409124-001
Smart Array P400 Controller battery cable assembly, 24 inch4 409125-001
12-06-2010 06:56 AM
What would be the spare number with the 15-pin in-line connector then?
(*) cable label says:
Rev C M/D 19/09