Re: ProLiant ML350 G4 (208 Views)
Reply
Occasional Contributor
pappkopp
Posts: 3
Registered: ‎11-24-2012
Message 1 of 2 (297 Views)

ProLiant ML350 G4

Hello and good day.

 

I have a ml350 g4 and i have these questions:

 

I dont have the cpu-fan & heatsink does it need that to boot?

 

Does it need the chassis fan to boot?

 

What ram does it need?

 

And one other question:

I have some ibm raid controllers will they work?

 

Kind regards

Hermann

 

HP Pro
Suman_1978
Posts: 1,017
Registered: ‎12-07-2010
Message 2 of 2 (208 Views)

Re: ProLiant ML350 G4

Hi,

 

Here is what I know with supporting links:

 

I dont have the cpu-fan & heatsink does it need that to boot?
Yes the CPU heatsink is very much required, fan is also required.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00652678

Does it need the chassis fan to boot?
Chassis fan is optional I guess.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00357584

What ram does it need?
Max RAM is 8GB
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00357942

I have some ibm raid controllers will they work?
IBM Raid controller, I dont think so because HP server backplane, cables and hard drive firmware may not be compatible.

 

Hope this helps.

Thanks

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.