ML350 G5 - Accelerator board status change (2825 Views)
Reply
Occasional Contributor
brad Davidson
Posts: 2
Registered: ‎11-29-2007
Message 1 of 3 (2,825 Views)

ML350 G5 - Accelerator board status change

Hi Guys, after a reboot we recieve the following 3 event errors ... im trying to ascertain 1) if this is innocuous, and 2) how we may prevent the errors occuring (either by rectification, or refinement of logging)

Thanks,

Brad

The system has detected the following event:

SNMP Trap: 6027

Date time: 11/30/2007 11:11:27 AM
Computer: ROBOWASHSVR1
Source: Server Agents
Type: Warning
Category: (4)

Description:
A 'POST Errors Encountered' trap signifies that one or more errors occurred during the Power-On-Self-Test when the system started.

Details:
None

-------------------------------------------------------------------------------------------------------

he system has detected the following event:

SNMP Trap: 3038

Date time: 11/30/2007 11:11:32 AM
Computer: ROBOWASHSVR1
Source: Storage Agents
Type: Warning
Category: (4)

Description:
An 'Accelerator Board Status Change' trap signifies that the agent has detected a change in the status of an array accelerator cache board.

Details:
IDA Accelerator Status 'TEMPORARILY DISABLED'
MEMORY 131072
Controller Slot # 2
Model 32
Serial Number 'P9A3A0B9SV16FN'

-----------------------------------------------------------------------------------------------------------

The system has detected the following event:

SNMP Trap: 3038

Date time: 11/30/2007 11:53:29 AM
Computer: ROBOWASHSVR1
Source: Storage Agents
Type: Informational
Category: (4)

Description:
An 'Accelerator Board Status Change' trap signifies that the agent has detected a change in the status of an array accelerator cache board.

Details:
IDA Accelerator Status 'ENABLED'
MEMORY 131072
Controller Slot # 2
Model 32
Serial Number 'P9A3A0B9SV16FN'
Please use plain text.
Honored Contributor
KarloChacon
Posts: 4,376
Registered: ‎04-08-2007
Message 2 of 3 (2,825 Views)

Re: ML350 G5 - Accelerator board status change

hi

seeing all the messages... the first one is telling you that another errors took place so check the others two.

have you check also HP integrated management log?

check also Array diagnostic utility

what is the array controller your server has?

also check this
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00760188/c00760188.pdf

Error
Error
6027 - pag 36
3038 - pag 10

like the PDF says if the error occurs again you need to replace the accelerator board but..

I recommend you first
- check if the accelerator board is properly seated
- update firmware for your controller

regards
Didn't your momma teach you to say thanks!
Please use plain text.
Occasional Visitor
w.vprodata-systems.be
Posts: 3
Registered: ‎06-23-2004
Message 3 of 3 (2,825 Views)

Re: ML350 G5 - Accelerator board status change

Hi, Brad.
I have the same problem on a DL380G3 with a sa-5i controller. I already toke the following actions -Firmware upgrade to 2.66 - replacing sa memory module - replacing system board with on board sa-5i controller.
I still have the same problem: after every reboot i get the message â Accelerator Board Status Change (3038)"
Do you have a solution for this problem?
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation