Re: Hyper-V on a Proliant DL380p Gen8 Running Windows 2008 R2 Standard (1423 Views)
Reply
Occasional Visitor
Posts: 1
Registered: ‎12-14-2013
Message 1 of 2 (1,470 Views)

Hyper-V on a Proliant DL380p Gen8 Running Windows 2008 R2 Standard

I'm trying to install Microsoft Hyper-V on Proliant DL380p Gen 8 running Windows 2008 R2 Standard and I'm getting the following error:

 

Hyper-V cannot be installed

 

The processor on this computer is not compatible with Hyper-V. To install this role, the processor must have a supported version of hardware-assisted virtualization, and that feature must be turned on in the BIOS.

 

Intel-VT is enabled in the BIOS and I have an identical server configured an working with Hyper-V. Anyone have any suggestions? Thanks.

Highlighted
Frequent Advisor
Posts: 33
Registered: ‎04-15-2012
Message 2 of 2 (1,423 Views)

Re: Hyper-V on a Proliant DL380p Gen8 Running Windows 2008 R2 Standard

[ Edited ]

Hello,

 

Do you enabled  the "No-Execute Memory Protection" in bios ?

 

 

Look this guide...  (Bios settings in pages 18-20)

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01516156/c01516156.pdf 

 

(already posted in the forum...)

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.