Re: HP Proliant ML110 G6 Boot Failed (1049 Views)
Reply
Occasional Advisor
RomanLis
Posts: 10
Registered: ‎09-09-2011
Message 1 of 4 (1,073 Views)

HP Proliant ML110 G6 Boot Failed

Hello,

 

I have HP Proliant ML110 G6 server with following RAID configuration:

 

1st RAID - 1 disk in Raid 0 (just a logical drive to make the system to see it)

2nd RAID - 2 disks in Raid 1+0

 

When I install Windows 7 on the 2nd RAID and it goes to restart first time - it doesn't boot from HDD - "Boot Failed".

 

What Can I do?

Please use plain text.
Occasional Contributor
pachya
Posts: 4
Registered: ‎12-10-2011
Message 2 of 4 (1,062 Views)

Re: HP Proliant ML110 G6 Boot Failed

could you pls run offline diagnostics and tell me what error message you were getting on that.
Please use plain text.
Honored Contributor
Johan Guldmyr
Posts: 3,833
Registered: ‎06-14-2009
Message 3 of 4 (1,061 Views)

Re: HP Proliant ML110 G6 Boot Failed

Did you load the drivers? Is windows 7 supported on the ML110 G7?


Click the Kudos Star if this was a good post.
Please use plain text.
HP Pro
Suman_1978
Posts: 934
Registered: ‎12-07-2010
Message 4 of 4 (1,049 Views)

Re: HP Proliant ML110 G6 Boot Failed

Windows 7 is not supported on ML110 G6.

 

But I would suggest you to check/change Boot Order in BIOS.
Boot Settings Configuration:
Standard Boot Order:

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation