HP ML150G6 - 510-BMC Sel is Full (25961 Views)
Reply
Occasional Visitor
Posts: 1
Registered: ‎06-17-2010
Message 1 of 3 (25,961 Views)
Accepted Solution

HP ML150G6 - 510-BMC Sel is Full

When starting my server I receive this message

BMC Responding
510-BMC Sel is Full

Then I accessed the BIOS but I didn't found the way to clear the BMC log.

How can I clear the log??

Thanks a lot for your answers
Esteemed Contributor
Posts: 371
Registered: ‎02-16-2010
Message 2 of 3 (25,961 Views)

Re: HP ML150G6 - 510-BMC Sel is Full

Hi,

1. Boot the server and press the F10 key when prompted to run BIOS Setup.
2. Select the "Advanced" menu.
3. Scroll down to "IPMI" and press the ENTER key
4. Scroll down to the System Event Log and press the ENTER key.
5. At the "Clear System Event Log" selection, press the ENTER key to toggle between "Enable" and "Disable."
6. Select "Enable."
7. Press the F10 key to Save the changes and exit the BIOS Setup

That will also fix the problem :) Remember to assign points to answers that helped in your problem. So the forum stays alive...
__________________________________________________
How to assign points on this new forum? Click the Kudos Star!

I try everything but I do what I can.
Occasional Visitor
Posts: 1
Registered: ‎08-23-2011
Message 3 of 3 (25,831 Views)

Re: HP ML150G6 - 510-BMC Sel is Full

We have had a problem with this kind of server and it stops frequently.  When I saw this message I did what the solution told, cleared the system log in biom (BMC).  Could that cause the system stop?  There was something about CPU fan..

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.