HP DL380 G8 - F10 HP Provisioning does not instal NCU Nic teaming (3325 Views)
Reply
Occasional Contributor
AC_Cobra
Posts: 3
Registered: ‎12-03-2013
Message 1 of 3 (3,325 Views)
Accepted Solution

HP DL380 G8 - F10 HP Provisioning does not instal NCU Nic teaming

 

Hi All, I have built a few Proliant DL 380 G8's Using the iLO and my local drive mapped through the remote console.

 

Everytime i complete a build the NCU Nic teaming utility is not installed

 

I ran the firmware update prior to OS install and HP Provisioning is v1.50.

 

Have i done something wrong ?

 

I searched but cannot find the NCU teaming software, where can i download it from?  

 

 

 

Honored Contributor
Cederberg
Posts: 553
Registered: ‎07-03-2007
Message 2 of 3 (3,294 Views)

Re: HP DL380 G8 - F10 HP Provisioning does not instal NCU Nic teaming

What OS are you trying to build?

 

if it's windows 2012 or 2012 R2 HP hasn't release a NCU because the OS has builtin support for nicteaming since 2012.

 

if it's windows 2008 r2 follow the link

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5177958&sp...

 

Occasional Contributor
AC_Cobra
Posts: 3
Registered: ‎12-03-2013
Message 3 of 3 (3,280 Views)

Re: HP DL380 G8 - F10 HP Provisioning does not instal NCU Nic teaming

[ Edited ]

Thanks Cederberg, It was for Windows 2008 R2.

I can't think why the provisioning would not install it by default though.

HP SmartStart would alway install it for Windows O/S's

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.