Event ID: 264 (412 Views)
Reply
Occasional Visitor
Patrick Holden
Posts: 3
Registered: ‎01-09-2003
Message 1 of 12 (412 Views)

Event ID: 264

Event Type: Warning
Event Source: NIC Agents
Event Category: Service
Event ID: 264
Date: 1/10/2003
Time: 12:51:49 PM
User: N/A
Computer: FRANKLIN
Description:
Component: Compaq NIC Management Agent Error: Unable to open the registry key "%1". Cause: This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Data:
0000: 02 00 00 00 ....
May GOD come and save the world NOW
Honored Contributor
Eugeny Brychkov
Posts: 3,296
Registered: ‎03-14-2002
Message 2 of 12 (412 Views)

Re: Event ID: 264

Patrick,
how often you server experiences this event? Did you check what was proposed? Memory low? Rebooted? I remember there's a command to check registry, but can not recall its spelling :o(
Eugeny
Honored Contributor
Theo Hill_1
Posts: 400
Registered: ‎07-05-2001
Message 3 of 12 (412 Views)

Re: Event ID: 264

IS this a clustered server? If not, try removing the cluster service.
Occasional Visitor
Patrick Holden
Posts: 3
Registered: ‎01-09-2003
Message 4 of 12 (412 Views)

Re: Event ID: 264

The server is experiencing the problem every two minutes. I followed the procedure, which said reboot the server, but it did not clear. The server is not clustered.
May GOD come and save the world NOW
Occasional Contributor
Mike_387
Posts: 5
Registered: ‎03-30-2003
Message 5 of 12 (412 Views)

Re: Event ID: 264

Patrick

I have the same error message in my event log. Have you found any solutions for this problem? I also rebootet the server and the memorys are ok.

Thanks!
Honored Contributor
Terry Hutchings
Posts: 1,227
Registered: ‎03-19-2003
Message 6 of 12 (412 Views)

Re: Event ID: 264

What kind of machine is this? Is there a dual port nic installed and are both port being used? If one of the ports is not being used, I would recommend using the loopback adapter which came with the server/dual port nic.
The truth is out there, but I forgot the URL..
Occasional Contributor
Mike_387
Posts: 5
Registered: ‎03-30-2003
Message 7 of 12 (412 Views)

Re: Event ID: 264

I have only one NIC installed and these NIC is on the system board. The drivers and Agents that are installed on the system are SmartStart Vers. 6.2
Occasional Visitor
Marius Zeineh
Posts: 1
Registered: ‎06-25-2003
Message 8 of 12 (412 Views)

Re: Event ID: 264

I also have the same error appearing every two minutes on a non clustered DL380 G2. Was there ever a solution to this problem?
Occasional Visitor
Igor_47
Posts: 1
Registered: ‎11-12-2004
Message 9 of 12 (412 Views)

Re: Event ID: 264

I have the same error. Was this resolved
?
Occasional Visitor
Razmi Patel
Posts: 1
Registered: ‎10-18-2004
Message 10 of 12 (412 Views)

Re: Event ID: 264

I also have this problem, Has this been resolved. I have a dual NIC server (both in use) and it is not clustered.

Thanks

Raz
Occasional Visitor
Michele Niccore
Posts: 1
Registered: ‎01-27-2005
Message 11 of 12 (412 Views)

Re: Event ID: 264

I am having the same problem. The server is a dual NIC but not a dual port single NIC. I've tried disabling the unused NIC and plugging it in and using it. I still get the same problem. The error is slightly different with an "Unable to open the registry key "(null)"

Rebooting does not fix this problem and the server does not have a low memory condition. It doesn't seem to stop the machine from running but it's filling up my system event logs. If there was a real problem with the system I wouldn't know it because I would never find the event.

If anyone figures this one out...please post your fix!

Occasional Visitor
Makubex
Posts: 1
Registered: ‎10-10-2005
Message 12 of 12 (412 Views)

Re: Event ID: 264


For this problem, I have see this error last night after i switch ATM to GIGABIT NIC.
I try to find what wrong in my Server then I see "Compaq NIC Agent" Service still running
on my service management, That same as my error. I think may It can not find old NIC.
That you install HP Inside Manager? I think we can stop that service then error will gone.

http://www.thaiadmin.org
Have Fun

Makubex
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.