DL380G5 (113 Views)
Reply
Frequent Advisor
kazim_1
Posts: 74
Registered: ‎05-28-2005
Message 1 of 5 (113 Views)

DL380G5

Hi All,

Fan speed high in DL380G5 no display i have replaced system board after replacement of system board fan speed not controllable no display again then i replaced fan board again issue is still want can i do

adeel
Please use plain text.
Esteemed Contributor
Modris Bremze
Posts: 337
Registered: ‎09-11-2009
Message 2 of 5 (113 Views)

Re: DL380G5

It is hard to understand without any punctuation. Please clarify. And what do you mean by "no display"?
Please use plain text.
Frequent Advisor
kazim_1
Posts: 74
Registered: ‎05-28-2005
Message 3 of 5 (113 Views)

Re: DL380G5

There is no display on screen and the fan speed high untill pull out the power cable.
All six fan LED's "AMBER indication" on the front pannel of machine.
Please use plain text.
Valued Contributor
Valued Contributor
SMR
Posts: 145
Registered: ‎02-27-2008
Message 4 of 5 (113 Views)

Re: DL380G5

This server originally shipped on a 12-fan config, then transitioned to a 6-fan config,subsequent fan boards have a jumper to set the correct model and allow proper operation. Try inspecting the fan board for a fan jumper.I believe you have to remove the jumper for 12-fan models and install it for 6-fan models.
Please use plain text.
Frequent Advisor
kazim_1
Posts: 74
Registered: ‎05-28-2005
Message 5 of 5 (113 Views)

Re: DL380G5

where is the location of jumper
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation